Infineon Technologies
S25FL116K0XMFA013
Why Choose Us?
Professional Platform
B2B & B2C purchasingDelivery at full speed
1-2 days deliveryWide variety
Original manufacturers365 days guarantee
Responsible quality
.png)
Tech Specifications
S25FL116K0XMFA013 Description
S25FL116K0XMFA013
16Mbit (2MB) 3V SPI NOR Flash | Dual/Quad I/O | Industrial Grade | High‑Performance
Density (2MB)
Supply Range
Interface
Clock (Quad)
150mil Package
Product Overview
The Infineon S25FL116K0XMFA013 is a 16M‑bit (2,097,152 bytes) SPI NOR Flash memory from the FL‑S family, designed for high‑performance, low‑pin‑count embedded systems. Operating from a 2.7V to 3.6V power supply, it supports standard SPI, Dual SPI, and Quad SPI modes, with a maximum clock frequency of 108 MHz in Quad I/O mode, delivering a read throughput of 432 Mbps. This makes it ideal for execute‑in‑place (XIP) applications, fast boot code execution, and parameter storage.
The device is organized as 8,192 programmable pages of 256 bytes each, with a flexible erase architecture: 4KB sectors, 32KB blocks, 64KB blocks, and full chip erase. Housed in a standard 8‑pin SOIC (150mil) package (0XMFA013 suffix), it operates over the industrial temperature range of -40°C to +85°C, making it suitable for industrial control, networking, IoT gateways, and automotive aftermarket applications. With 100,000 program/erase cycles and 20‑year data retention, the S25FL116K delivers the endurance and reliability expected from Infineon’s leading NOR Flash technology.
📊 Technical Specifications
| Density / Organization | 16Mbit (2,097,152 x 8) — 2MB |
| Memory Interface | SPI / Dual SPI / Quad SPI (1-1-1, 1-1-2, 1-1-4, 1-4-4) |
| Max Clock Frequency | 108 MHz (Quad I/O), 108 MHz (Dual), 108 MHz (Single) |
| Quad Read Throughput | 432 Mbps (54 MB/s) @ 108MHz |
| Page Program Size | 256 bytes per page |
| Erase Granularity | 4KB sector, 32KB block, 64KB block, full chip erase |
| Supply Voltage (Vcc) | 2.7V – 3.6V (3.3V typical) |
| Operating Temperature | Industrial: -40°C to +85°C |
| Storage Temperature | -65°C to +150°C |
| Package Type | 8‑pin SOIC (150mil body width, JEDEC MS-012) |
| Package Dimensions | 4.9 x 3.9 x 1.5 mm (approx) |
| Endurance | 100,000 program/erase cycles (minimum) |
| Data Retention | 20 years (minimum) @ 55°C |
| Active Read Current | 15 mA (typical @ 108MHz, Quad) |
| Standby Current | 5 µA (typical) |
| Deep Power-Down | 0.5 µA (typical) |
| Write Protection | Hardware WP# pin, software block protection (BP0-BP3) |
| Security Features | Unique 64‑bit ID, 4K‑bit OTP security register |
| Suspend/Resume | Supported for program/erase operations |
| RoHS / Halogen Free | Yes — “0” suffix indicates green, lead‑free |
| Moisture Sensitivity Level | MSL 3 (168 hours) |
| Part Status | Active — In full production |
✨ Key Features
- ✅ High‑Speed Quad SPI – 108MHz clock, 432Mbps throughput for fast XIP and boot
- ✅ Industry Standard 3V Operation – 2.7‑3.6V wide range, compatible with most SoCs
- ✅ Low Power Consumption – 5µA standby, 0.5µA deep power‑down – extends battery life
- ✅ Flexible Erase Architecture – 4KB sectors, 32KB/64KB blocks, plus chip erase
- ✅ Hardware & Software Write Protection – WP# pin and configurable protected area
- ✅ Unique 64‑bit ID & OTP Register – factory‑programmed unique ID, 4K‑bit OTP for secure keys
- ✅ Suspend/Resume Capability – allows interruption of erase/program for latency‑sensitive reads
- ✅ High Reliability – 100K P/E cycles, 20‑year data retention at 55°C
- ✅ Industrial Temperature Range – -40°C to +85°C for harsh environments
- ✅ Standard SOIC8 Package – 150mil body, easy PCB layout and drop‑in replacement
- ✅ JEDEC Standard Command Set – interoperable with most SPI NOR Flash controllers
- ✅ Long‑term Availability – Infineon’s commitment to industrial and embedded markets
⚡ Quad SPI Performance & Modes
Compatible with all SPI hosts
Good speed / pin trade‑off
Optimal XIP performance
The S25FL116K supports QPI (Quad Peripheral Interface) mode where all commands and addresses are transmitted over 4 I/O lines. It also features a “Fast Read Quad I/O” command (EBh) with 8 dummy cycles for high‑speed random access, enabling seamless execute‑in‑place (XIP) without code shadowing to RAM.
🔒 Security & Write Protection Features
🔑 Unique 64‑bit Device ID
Each S25FL116K is factory‑programmed with a unique serial number, enabling device authentication, anti‑counterfeiting, and simple inventory tracking.
📦 4K‑bit OTP (One‑Time Programmable) Register
A dedicated OTP area for permanent storage of encryption keys, serial numbers, or manufacturing data. The OTP region can be locked permanently to prevent further writes.
🛡️ Flexible Write Protection
The Block Protection bits (BP0-BP3) allow software‑defined protection of up to 50% of the memory in 4KB increments. When the hardware WP# pin is driven low, the status register becomes read‑only, preventing any modification to the protection scheme.
⏸️ Program/Erase Suspend
During a long erase operation (up to 300ms for 64KB block), the host can issue a suspend command, perform a read from another sector, and then resume the erase without data corruption.
📦 Ordering Information & Part Number Decoder
| Orderable Part Number | Temperature | Package | Description |
|---|---|---|---|
| S25FL116K0XMFA013 | -40°C to +85°C | SOIC8 (150mil) | Industrial, tape & reel (2500 pcs/reel) |
| S25FL116K0XMFB013 | -40°C to +105°C | SOIC8 (150mil) | Automotive Grade 2 (AEC‑Q100) |
| S25FL116K0XNFV013 | -40°C to +85°C | WSON8 (6x5mm) | Compact package, tape & reel |
| S25FL116K0XMFI013 | -40°C to +85°C | SOIC8 | Tube packaging (100 pcs/tube) |
| S25FL116K0XMEB013 | -40°C to +125°C | SOIC8 | Extended temperature (Grade 1) |
• S25FL116K – Infineon (Cypress) SPI NOR Flash family, 16Mbit, 3V
• 0 – Density code (16Mbit)
• X – Quad I/O capable
• M – Package: M = SOIC8 (150mil)
• F – Industrial temperature (-40°C to +85°C)
• A – Special configuration / die revision
• 013 – Tape & Reel packaging (13” reel)
🏆 Infineon Technologies – A Leader in NOR Flash
Infineon Technologies (formerly Cypress Semiconductor’s memory division) is a global leader in high‑performance NOR Flash memory. The FL‑S family combines industry‑standard command sets with advanced features for embedded systems. Infineon’s NOR Flash products are trusted by major OEMs for their reliability, long lifecycle, and technical support.
- Top 3 NOR Flash supplier worldwide – after acquiring Cypress
- AEC‑Q100 qualified automotive grade options (Grade 1/2/3)
- ISO 26262 ASIL D compliant development processes
- ISO 9001, ISO 14001, IATF 16949 certified manufacturing
- Long‑term product commitment – 20+ year supply for industrial and automotive
🛠️ Development Tools & Support
Infineon provides free samples, evaluation boards, and direct FAE support through authorized distributors. Design‑in assistance, IBIS models, and failure analysis are available for qualified customers.
📄 Certifications & Compliance
- RoHS 2011/65/EU (Compliant)
- REACH SVHC (Compliant)
- Halogen‑free per IEC 61249-2-21
- Conflict Minerals (CFSI) report available
- AEC‑Q100 Grade 2/3 options available
📦 Packaging & Logistics
- Tape & Reel: 2500 pcs per 13" reel (SOIC8)
- Tube: 100 pcs per tube
- Moisture Sensitivity Level: MSL 3
- Lead finish: NiPdAu (green, halogen‑free)
- Lead time: 8‑10 weeks ARO, stock available via distributors
FAQ
| Quantity | Unit Price | Ext. Price |
|---|---|---|
| 1202+ | $0.96800 | $1163.54 |
Not available to buy online? Want the lower wholesale price? Please Send RFQ to get best price, we will respond immediately
.png?x-oss-process=image/format,webp/resize,h_32)
