Microchip Technology Tariff Inquiry

AT90S4414-4AC

The AT90S4414-4AC is a low-power, high-performance 8-bit microcontroller (MCU) manufactured by Microchip Technology. It is based on the AVR enhanced RISC architecture, which provides high code density, superior interrupt response, and a wide range of integrated peripherals. The AT90S4414-4AC is part of the AT90S4000 series, which is designed for a variety of applications, including industrial control, medical equipment, and consumer electronics.

Description:

The AT90S4414-4AC features a 4KB in-system programmable flash memory for storing the program code, 512 bytes of EEPROM, and 512 bytes of SRAM. It operates at a supply voltage range of 4.5V to 5.5V and has a typical operating current of 2mA.

Features:

1. 8-bit AVR RISC CPU with 16 general-purpose working registers.
2. 4KB on-chip flash memory with read-while-write capability.
3. 512 bytes EEPROM.
4. 512 bytes SRAM.
5. Watchdog timer with internal and external oscillator options.
6. 16 interrupt priority levels.
7. Two 8-bit timers/counters with asynchronous mode and optional 8-phase PWM.
8. Two 8-bit I/O ports with programmable interrupt/enable.
9. SPI serial interface.
10. Two USARTs (Universal Synchronous/Asynchronous Receiver/Transmitter) with IrDA support.
11. 8MHz operation with a 16MHz crystal.
12. Active low reset pin.
13. Brown-out detection with programmable threshold.
14. Programmable power saving modes.
15. Programmable I/O pin options.

Applications:

The AT90S4414-4AC is suitable for a wide range of applications due to its low power consumption, high performance, and versatile features. Some common applications include:

1. Industrial control systems: Programmable logic controllers, motor control, and sensor interfacing.
2. Medical equipment: Patient monitoring devices, diagnostic equipment, and portable medical instruments.
3. Consumer electronics: Home automation, smart appliances, and portable devices.
4. Telecommunications: Modems, voice over IP (VoIP) devices, and security systems.
5. Automotive: In-vehicle infotainment systems, engine control modules, and sensor interfaces.
6. Robotics: Control systems for small robots, autonomous vehicles, and robotic arms.
7. Data acquisition and signal processing: Environmental monitoring, energy management, and industrial automation.

The AT90S4414-4AC's combination of performance, low power consumption, and a wide range of integrated peripherals make it an ideal choice for embedded systems requiring a compact, efficient, and cost-effective solution.