Microchip Technology Tariff Inquiry

AT90S4433-8AC

The AT90S4433-8AC is a low-power, high-performance 8-bit microcontroller (MCU) manufactured by Microchip Technology. It belongs to the AT90S4000 series, which is based on the AVR enhanced RISC architecture. The AT90S4433-8AC is specifically designed for applications that require a combination of high computational power, low power consumption, and a compact form factor.

Description:

The AT90S4433-8AC features a rich set of integrated peripherals and a high-density Flash memory. It is based on the AVR core, which provides fast execution of instructions and efficient power consumption. The MCU operates at a supply voltage range of 5V and has an operating temperature range of -40°C to +85°C.

Features:

1. CPU: AVR RISC architecture with 16 x 16-bit registers and a clock frequency of up to 20 MIPS at 18.432 MHz.
2. Memory: 48KB on-chip Flash memory, 6KB SRAM, and 1KB EEPROM.
3. I/O: 48 programmable I/O lines, with support for external interrupts and pull-up resistors.
4. Timers: Two 8-bit timers with 8-bit latches and watchdog timer.
5. Communication interfaces: Two USARTs (Universal Synchronous/Asynchronous Receiver/Transmitter) for serial communication.
6. ADC: 8-channel, 10-bit Analog-to-Digital Converter.
7. Programmable voltage regulator with internal voltage reference.
8. Low-power modes: Idle, Power-down, and Power-save modes.
9. Security features: In-system programmable (ISP) and In-circuit programmable (ICP) capabilities, along with a hardware encryption feature.
10. Package: Available in a 40-pin PDIP (Plastic Dual In-line Package) and a 44-pin PLCC (Plastic Leaded Chip Carrier).

Applications:

The AT90S4433-8AC is suitable for a wide range of applications that require a balance between performance, power efficiency, and compactness. Some of the potential applications include:

1. Industrial control systems: Programmable logic controllers, motor control, and sensor interfacing.
2. Medical devices: Patient monitoring systems, portable diagnostic equipment, and medical instruments.
3. Consumer electronics: Home automation, smart appliances, and portable devices.
4. Telecommunication systems: Modems, voice over IP (VoIP) devices, and data acquisition systems.
5. Automotive applications: In-vehicle infotainment systems, engine control modules, and body control modules.
6. Security systems: Access control systems, intrusion detection systems, and surveillance cameras.

The AT90S4433-8AC's combination of features, such as its powerful CPU, ample memory, and low power consumption, make it a versatile choice for a variety of embedded systems and applications.