Microchip Technology Tariff Inquiry

ATSAMD20G14A-MUT

The ATSAMD20G14A-MUT is a low-power microcontroller unit (MCU) manufactured by Microchip Technology. This device is part of the SAM D20 family of Cortex-M0+ based MCUs, which are designed for a wide range of applications that require low power consumption and high performance.

Description:

The ATSAMD20G14A-MUT is a 32-bit ARM Cortex-M0+ processor with a maximum CPU frequency of 48 MHz. It features 16 kB of Mask ROM, 1 kB of SRAM, and 1024 kB of Flash memory. This MCU is available in a 48-pin, 6 mm x 6 mm, Mutually Shrink QFN (MSQFN) package.

Features:

1. ARM Cortex-M0+ processor with a maximum CPU frequency of 48 MHz
2. 16 kB Mask ROM
3. 1 kB SRAM
4. 1024 kB Flash memory
5. 48 general-purpose I/O (GPIO) lines
6. 12-channel direct memory access (DMA) controller
7. Peripheral touch controller (PTC) with up to 32 touch channels
8. 8-channel 10-bit successive approximation register (SAR) analog-to-digital converter (ADC)
9. 2-channel digital-to-analog converter (DAC)
10. Advanced encryption standard (AES) coprocessor
11. USB 2.0 full-speed (FS) interface
12. 2 serial communication interfaces (SERCOM) supporting I2C, SPI, and USART modes
13. 8 pulse width modulation (PWM) channels
14. Event system for low-power inter-peripheral communication
15. Internal oscillator with a precision of +/- 1%

Applications:

1. Battery-powered devices: The low-power consumption of the ATSAMD20G14A-MUT makes it suitable for applications such as wireless keyboards, mice, and wearable devices.
2. Industrial control: The device's robustness and wide operating temperature range make it suitable for industrial control applications, such as motor control and sensor interfacing.
3. Medical devices: The ATSAMD20G14A-MUT can be used in medical devices that require low power consumption and precise analog measurements, such as portable monitoring equipment and wearable health devices.
4. Home automation: The MCU can be used in home automation systems for controlling smart appliances, lighting, and HVAC systems.
5. IoT devices: The integrated USB interface and low-power features make the ATSAMD20G14A-MUT suitable for Internet of Things (IoT) devices, such as smart sensors and connected home appliances.
6. Touch-based applications: The peripheral touch controller with up to 32 touch channels enables the development of touch-based interfaces for various applications, such as touch-sensitive buttons and sliders.

The ATSAMD20G14A-MUT is a versatile and low-power MCU that can be used in a wide range of applications, making it an excellent choice for developers looking for a balance between performance, power efficiency, and cost-effectiveness.