Microchip Technology Tariff Inquiry

ATSAMD20J17A-MNT

The ATSAMD20J17A-MNT is a low-power microcontroller (MCU) from Microchip Technology. It is part of the SAM D20 family of ARM Cortex-M0+ based MCUs, which are designed for a wide range of applications that require low power consumption, high performance, and a small form factor.

Description:

The ATSAMD20J17A-MNT is a 32-bit ARM Cortex-M0+ based MCU with a 48MHz maximum CPU frequency. It features 256KB of flash memory, 32KB of SRAM, and a wide range of peripherals, including USB, SERCOM (Serial Communication Interface), and ADC (Analog-to-Digital Converter). The MCU is available in a 64-pin QFN (Quad Flat No-leads) package.

Features:

1. ARM Cortex-M0+ processor with a 48MHz clock speed
2. 256KB of flash memory
3. 32KB of SRAM
4. 64-pin QFN package
5. USB 2.0 interface with host, device, and OTG (On-The-Go) support
6. SERCOM for SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit), and USART (Universal Synchronous/Asynchronous Receiver-Transmitter) communication
7. 12-channel ADC with up to 16-bit resolution
8. 8-channel DAC (Digital-to-Analog Converter)
9. Event system for low-power operation and low-glitch interrupt routing
10. Core-coupled memory (CCM) for zero-wait state execution from flash
11. Peripheral touch controller with up to 32 touch channels
12. CRC (Cyclic Redundancy Check) generator
13. True random number generator (TRNG)
14. Core voltage range of 1.62V to 3.6V
15. I/O voltage range of 2.0V to 5.5V

Applications:

The ATSAMD20J17A-MNT is suitable for a wide range of applications, including but not limited to:

1. Battery-powered devices: The low-power features make it ideal for devices that require extended battery life, such as portable electronics, wearables, and IoT devices.
2. Industrial control: The MCU's robustness and range of communication interfaces make it suitable for industrial control applications, such as motor control, sensor interfacing, and data acquisition.
3. Medical devices: The ATSAMD20J17A-MNT can be used in medical devices that require precise analog measurements and low power consumption, such as portable monitoring devices and diagnostic equipment.
4. Consumer electronics: The MCU's USB interface and low power consumption make it suitable for applications like smart home devices, portable media players, and gaming peripherals.
5. Automotive applications: The ATSAMD20J17A-MNT can be used in automotive applications that require low power consumption and a wide range of communication interfaces, such as infotainment systems, body control modules, and sensor hubs.

The ATSAMD20J17A-MNT's combination of low power consumption, high performance, and a wide range of peripherals make it a versatile and popular choice for many embedded systems and IoT applications.