Microchip Technology Tariff Inquiry

ATTINY11-6PU

The ATTINY11-6PU is a low-power, 8-bit microcontroller (MCU) from Microchip Technology. It is part of the AVR Enhanced I/O (AEI) series and is designed for a wide range of applications that require small size, low power consumption, and high performance.

Description:

The ATTINY11-6PU is a compact and efficient microcontroller featuring an 8-bit RISC architecture with 128 bytes of internal SRAM, 8 KB of in-system programmable flash memory, and 512 bytes of EEPROM. It operates at a frequency of up to 6 MHz and has a wide operating voltage range of 1.8V to 5.5V.

Features:

1. 8-bit RISC CPU with 6 clock instruction execution
2. 128 bytes of internal SRAM
3. 8 KB of in-system programmable flash memory
4. 512 bytes of EEPROM
5. 6 MHz maximum operating frequency
6. Wide operating voltage range: 1.8V to 5.5V
7. I/O options: 6 x 2/3 I/O lines with optional internal pull-up resistors
8. Power-saving features: Power-down mode, idle mode, and extended standby mode
9. Programmable watchdog timer with internal oscillator
10. Internal calibrated RC oscillator
11. Brown-out detection and reset
12. Two software selectable power saving sleep modes
13. Four-level hardware interrupt with two-level priority scheme
14. In-circuit serial programming (ICSP) and debugging interface

Applications:

1. Battery-powered devices: Due to its low power consumption, the ATTINY11-6PU is suitable for battery-powered applications like portable electronics, remote controls, and wireless sensors.
2. Embedded systems: The ATTINY11-6PU can be used in various embedded systems, such as home automation, security systems, and industrial control applications.
3. Medical devices: The low power consumption and small form factor make it suitable for medical devices like wearable health monitors and portable diagnostic equipment.
4. Toys and games: The ATTINY11-6PU can be used in simple electronic toys, games, and hobbyist projects.
5. Data logging: The microcontroller's EEPROM can be utilized for data logging applications in various fields, such as environmental monitoring and equipment tracking.
6. Sensor interfacing: The ATTINY11-6PU can interface with various sensors for applications like temperature monitoring, humidity control, and pressure sensing.

The ATTINY11-6PU's combination of low power consumption, small size, and versatile features make it a popular choice for a wide range of applications where space and power are critical constraints.