Microchip Technology Tariff Inquiry

ATTINY88-15AZ

The ATTINY88-15AZ is a low-power, 8-bit microcontroller (MCU) from Microchip Technology. It is based on the AVR enhanced low-power architecture and is designed for a wide range of applications that require low power consumption and high performance.

Description:

The ATTINY88-15AZ features 8 KB of in-system programmable flash memory, 512 bytes of EEPROM, and 6 KB of SRAM. It operates at a frequency of up to 16 MHz and has a wide operating voltage range of 1.8 to 5.5 V. The device is available in a 20-pin QFN package.

Features:

1. Low-power consumption: The ATTINY88-15AZ offers several power-saving features, such as power-down mode, power-save mode, and idle mode, which help extend battery life in portable applications.
2. Enhanced AVR core: The device features an enhanced AVR core with 16 general-purpose registers, providing high code density and fast execution.
3. Memory: The MCU includes 8 KB of in-system programmable flash memory, 512 bytes of EEPROM, and 6 KB of SRAM for data storage and program execution.
4. I/O: The ATTINY88-15AZ has 15 digital I/O lines with optional internal pull-up resistors and 4 channels of programmable digital input/output ports.
5. Timers and PWM: The device includes two 8-bit timer/counters with clock select and compare modes, and 6-channel pulse-width modulation (PWM) for generating precise timing and control signals.
6. Communication interfaces: The ATTINY88-15AZ features a Universal Serial Interface (USI) for low-power serial communication and a Universal Asynchronous Receiver/Transmitter (UART) for serial communication.
7. Analog-to-Digital Converter (ADC): The MCU has a 4-channel, 10-bit ADC with up to 200ksps conversion rate for interfacing with analog sensors.
8. Security: The device includes a JTAG interface and a bootloader section, which can be used to implement security features and simplify firmware updates.

Applications:

The ATTINY88-15AZ is suitable for a wide range of applications due to its low power consumption, high performance, and versatile features. Some common applications include:

1. Battery-powered devices: Wireless sensors, portable electronics, and wearable devices.
2. Industrial control: Motor control, actuator control, and process automation.
3. Consumer electronics: Home appliances, toys, and remote controls.
4. Medical devices: Patient monitoring systems, wearable health monitors, and portable medical instruments.
5. Automotive: Infotainment systems, body control modules, and lighting control.
6. IoT devices: Smart home devices, environmental monitoring systems, and energy management systems.

The ATTINY88-15AZ's combination of low power consumption, high performance, and a wide range of features make it an ideal choice for many embedded applications where power efficiency and compact form factor are critical.