Microchip Technology Tariff Inquiry

PIC10F322-I/OT

The Microchip Technology PIC10F322-I/OT is a low-cost, 8-pin microcontroller (MCU) that is part of the PIC10F series. This MCU is designed for a wide range of applications, including simple control and sensing applications, and is ideal for use in low-power and cost-sensitive environments.

Description:

The PIC10F322-I/OT is an 8-pin, low-power CMOS microcontroller with an integrated oscillator, which eliminates the need for external components. It features a RISC architecture with only 33 single-word instructions and 8-bit wide registers, making it an efficient and easy-to-program device. The device operates with a wide supply voltage range of 2.0V to 5.5V and has a maximum operating frequency of 16 MHz.

Features:

1. 8-pin package with integrated oscillator
2. RISC architecture with 33 single-word instructions
3. 8-bit wide registers
4. Wide supply voltage range (2.0V to 5.5V)
5. Maximum operating frequency of 16 MHz
6. Low-power consumption (typical standby current of 1.5 µA)
7. Internal low-voltage detection and brown-out reset
8. In-system programming (ISP) and in-circuit debugging (ICD) capabilities
9. Compatible with the MPLAB X IDE and the PIC10F microcontroller starter kit

Applications:

The PIC10F322-I/OT is suitable for a variety of applications, including but not limited to:

1. Simple control applications (e.g., appliance controls, motor control)
2. Battery-powered devices (e.g., remote controls, wireless sensors)
3. Industrial control and sensing (e.g., temperature monitoring, pressure sensing)
4. Consumer electronics (e.g., toys, small appliances)
5. Automotive control systems (e.g., window control, door lock systems)
6. Medical devices (e.g., wearable health monitors, simple diagnostic tools)
7. Security systems (e.g., access control, simple alarm systems)

The PIC10F322-I/OT's small form factor, low power consumption, and cost-effectiveness make it an attractive choice for a wide range of applications where a simple and efficient microcontroller is required.