Microchip Technology Tariff Inquiry

PIC16F1786-I/SO

PIC16F1786-I/SO is a microcontroller (MCU) from Microchip Technology's PIC16F series. It is a 16-bit device that features a wide range of integrated peripherals and functions, making it suitable for a variety of applications.

Description:

The PIC16F1786-I/SO is a mid-range, high-performance, 8-bit microcontroller with enhanced EEPROM memory. It is based on the PIC architecture and features a rich set of integrated peripherals, including a Universal Synchronous/Asynchronous Receiver/Transmitter (USART), a Serial Peripheral Interface (SPI), and an Inter-Integrated Circuit (I2C) interface. The device is available in a 28-pin, surface-mount, small-outline (SO) package.

Features:

1. Enhanced EEPROM memory: The PIC16F1786-I/SO features up to 256 bytes of EEPROM memory, which allows for non-volatile storage of data.
2. Enhanced USART: The device includes an enhanced USART with a baud rate generator and auto-baudranging capabilities, making it suitable for serial communication applications.
3. SPI and I2C interfaces: The PIC16F1786-I/SO includes SPI and I2C interfaces, enabling communication with other devices and peripherals.
4. Enhanced ADC: The device features an enhanced 10-bit Analog-to-Digital Converter (ADC) with up to 8 channels, allowing for accurate analog signal conversion.
5. On-chip debugging and programming: The PIC16F1786-I/SO includes an on-chip debugger and programmer, making it easier to develop and debug applications.
6. Low-power operation: The device offers several low-power modes, including Sleep, Idle, and Power-down, allowing for energy-efficient operation.
7. Wide operating voltage range: The PIC16F1786-I/SO operates over a wide voltage range of 2.0V to 5.5V, making it suitable for various power supply requirements.

Applications:

The PIC16F1786-I/SO is suitable for a wide range of applications, including but not limited to:

1. Industrial control systems: The device's enhanced USART, SPI, and I2C interfaces make it suitable for implementing communication protocols in industrial control systems.
2. Consumer electronics: The low-power operation and enhanced ADC make the PIC16F1786-I/SO suitable for battery-powered consumer electronics, such as portable devices and smart appliances.
3. Automotive applications: The device's robustness and wide operating voltage range make it suitable for automotive applications, such as control modules and sensor interfaces.
4. Medical devices: The PIC16F1786-I/SO can be used in medical devices, such as monitoring equipment and portable diagnostic tools, due to its low-power operation and enhanced ADC.
5. Data acquisition systems: The enhanced ADC and various communication interfaces make the device suitable for data acquisition systems, such as environmental monitoring and industrial sensing applications.

In summary, the PIC16F1786-I/SO is a versatile microcontroller from Microchip Technology, featuring enhanced EEPROM memory, a wide range of integrated peripherals, and low-power operation. It is suitable for a variety of applications, including industrial control systems, consumer electronics, automotive applications, medical devices, and data acquisition systems.