Microchip Technology

PIC16F505-I/SL  

Microcontrollers

Microchip Technology's PIC16F505-I/SL is a microcontroller unit (MCU) that belongs to the PIC16F series. It is a mid-range device with enhanced functionality and performance, making it suitable for a wide range of applications.

Description:

The PIC16F505-I/SL is a 28-pin, flash-based, 8-bit CMOS microcontroller with a wide operating voltage range of 2.0V to 5.5V. It features an enhanced RISC architecture with the option of using either a high-performance oscillator or an internal oscillator for system clock control. The device also includes a variety of integrated peripherals and communication interfaces, making it a versatile choice for various applications.

Features:

1. Enhanced RISC architecture with three-level stack and increased code density
2. Wide operating voltage range (2.0V to 5.5V)
3. 8-bit wide instruction set
4. On-chip flash memory with read-while-write capability
5. Internal oscillator with clock frequencies up to 20 MHz
6. Three 16-bit timer/counters with capture and compare modes
7. 5-volt tolerant parallel ports
8. USART for serial communication
9. Low-power sleep and idle modes
10. In-circuit serial programming (ICSP) and debugging capabilities

Applications:

The PIC16F505-I/SL is suitable for a wide range of applications due to its versatile features and enhanced performance. Some common applications include:

1. Industrial control systems: The device's robustness and wide operating voltage range make it suitable for use in industrial control applications, such as motor control, sensor interfacing, and process control.

2. Consumer electronics: The PIC16F505-I/SL can be used in various consumer electronics, such as appliances, toys, and gaming devices, where low power consumption and a wide operating voltage range are essential.

3. Automotive applications: The device's 5-volt tolerant parallel ports and low-power modes make it suitable for automotive applications, such as anti-lock braking systems (ABS), engine control units (ECUs), and infotainment systems.

4. Medical devices: The PIC16F505-I/SL can be used in medical devices that require precise control and monitoring, such as infusion pumps, patient monitoring systems, and diagnostic equipment.

5. Telecommunications: The device's USART and low-power modes make it suitable for use in telecommunications applications, such as modems, routers, and voice over IP (VoIP) devices.

6. Security systems: The PIC16F505-I/SL can be used in security systems, such as access control, intrusion detection, and surveillance systems, where reliable and low-power operation is crucial.

In summary, the PIC16F505-I/SL is a versatile microcontroller with a wide range of features and applications. Its enhanced RISC architecture, integrated peripherals, and communication interfaces make it suitable for various applications in industries such as industrial control, consumer electronics, automotive, medical devices, telecommunications, and security systems.

PIC16F505-I/SL Documents

Download datasheets and manufacturer documentation for PIC16F505-I/SL

Errata :

PIC16F505 Revision A Errata      

PCN Assembly/Origin :

Mult Devices 23/May/2017      

Datasheets :

PIC12F508/9, PIC16F505       PIC16F505 Programming Spec      

PCN Packaging :

Packing Changes 10/Oct/2016       Label and Packing Changes 23/Sep/2015      

Design Resources :

PIC16F505 Development Tool Selector      

Other Related Documents :

Tips N Tricks Guide      

HTML Datasheet :

Tips N Tricks Guide       PIC12F508/9, PIC16F505       PIC16F505 Programming Spec      

PCN Design/Specification :

Copper Bond Wire 5/Nov/2015      

Environmental Information :

Microchip CA Prop65       Microchip RoHS       Microchip REACH