Microchip Technology

PIC16F690-I/P  

Microcontrollers

Microchip Technology's PIC16F690-I/P is a microcontroller unit (MCU) that belongs to the PIC16F series. It is a mid-range device with enhanced functionality and performance, making it suitable for a wide range of applications.

Description:

The PIC16F690-I/P is a 28-pin microcontroller that features a rich set of integrated peripherals and advanced core features. It is based on the enhanced mid-range PIC® architecture and is designed to provide high performance and low power consumption. The device is available in a 28-pin PDIP (Plastic Dual In-Line Package) package.

Features:

1. Enhanced mid-range PIC® architecture with increased performance and reduced power consumption.
2. 28-pin PDIP package with a wide operating voltage range (2.0V to 5.5V).
3. 8 kB of Flash program memory for storing the user's program.
4. 368 bytes of RAM for data storage and program execution.
5. 256 bytes of EEPROM memory for non-volatile data storage.
6. Three 8-bit wide parallel peripherals with up to 16-bit access capability.
7. Two 8-bit timers with various modes of operation, including an 8-bit timer with a pre-scaler and a 16-bit timer with a pre-scaler.
8. A Universal Synchronous/Asynchronous Receiver/Transmitter (USART) for serial communication.
9. A low-voltage programming detection circuit.
10. An internal oscillator with a frequency range of 4 MHz to 32 MHz.
11. In-circuit serial programming (ICSP) and debugging capabilities.

Applications:

The PIC16F690-I/P is suitable for a wide range of applications due to its enhanced performance, low power consumption, and integrated peripherals. Some potential applications include:

1. Industrial control systems: The device's robustness and wide operating voltage range make it suitable for use in industrial control applications, such as motor control, sensor interfacing, and process control.
2. Consumer electronics: The PIC16F690-I/P can be used in consumer electronics devices, such as appliances, toys, and remote controls, where low power consumption and a compact form factor are essential.
3. Automotive applications: The device's low-voltage programming detection circuit and wide operating voltage range make it suitable for automotive applications, such as infotainment systems, lighting control, and engine management.
4. Medical devices: The PIC16F690-I/P can be used in medical devices, such as portable monitoring equipment, drug delivery systems, and diagnostic equipment, where reliability and low power consumption are crucial.
5. Telecommunication systems: The device's integrated USART and timers make it suitable for use in telecommunication systems, such as modems, routers, and voice over IP (VoIP) devices.

Overall, the PIC16F690-I/P is a versatile and powerful microcontroller that can be used in a wide range of applications, from industrial control systems to consumer electronics, automotive, medical, and telecommunication systems. Its enhanced performance, low power consumption, and integrated peripherals make it a popular choice for designers looking for a reliable and cost-effective solution.

PIC16F690-I/P Documents

Download datasheets and manufacturer documentation for PIC16F690-I/P

Errata :

PIC16F6xx Revision A Errata      

PCN Assembly/Origin :

Mult Dev 13/Apr/2020      

Datasheets :

PIC16F6xx Product Brief       Humidity Sensor PICtail Users Guide       PIC16F631, 68x, 690 Datasheet      

PCN Packaging :

Packing Changes 10/Oct/2016       Label and Packing Changes 23/Sep/2015      

Design Resources :

PIC16F690 Development Tool Selector       Available In the Digi-Key KiCad Library      

Other Related Documents :

Tips N Tricks Guide      

HTML Datasheet :

Humidity Sensor PICtail Users Guide       Tips N Tricks Guide      

Environmental Information :

Microchip CA Prop65       Microchip RoHS       Microchip REACH