Microchip Technology Tariff Inquiry

PIC16LF1938T-I/SS

The PIC16LF1938T-I/SS is a microcontroller (MCU) from Microchip Technology's PIC16LF series. It is a low-cost, high-performance 8-bit CMOS microcontroller with enhanced mid-range capabilities. The device features an enhanced Harvard architecture with separate program, data, and instruction memory spaces. Here's a brief description, features, and applications of the PIC16LF1938T-I/SS:

Description:

The PIC16LF1938T-I/SS is a flash-based, 8-bit microcontroller designed for a wide range of applications. It is available in a 28-pin, 0.300" (TQFP) package. The device is based on the PIC microcontroller architecture, which is known for its robustness, ease of use, and efficient code execution.

Features:

1. Enhanced mid-range core with increased performance and instruction set.
2. 8 KB Flash program memory with read-while-write capability.
3. 368 bytes of RAM (256 bytes general-purpose, 112 bytes special-purpose).
4. 256 bytes EEPROM data memory.
5. 16-bit wide instruction word and 8-bit wide registers.
6. Three 8-bit wide registers and 128 direct memory addresses.
7. Two 16-bit timer/counters with 8-bit postscaler.
8. 8-channel, 10-bit Analog-to-Digital Converter (ADC).
9. 16-bit internal oscillator with clock output.
10. Program and data memory protection.
11. Low-power RTCC with calibration.
12. On-chip debugging and programming support with ICD.
13. In-Circuit Serial Programming (ICSP) and SPI/T1 Master/Slave.
14. Active-high, open-drain, inverting/ non-inverting programmable I/O on all pins.
15. Power-on reset, brown-out reset, and watchdog timer.

Applications:

The PIC16LF1938T-I/SS is suitable for a wide range of applications due to its versatile features and capabilities. Some common applications include:

1. Industrial control systems and automation.
2. Consumer electronics, such as appliances and entertainment devices.
3. Automotive applications, such as body control modules and engine management systems.
4. Telecommunication systems, including modems and voice over IP (VoIP) devices.
5. Medical equipment, including monitoring devices and portable instruments.
6. Security systems, such as access control and surveillance equipment.
7. Data acquisition and signal processing systems.
8. Battery-powered devices, benefiting from the low-power features of the microcontroller.

The PIC16LF1938T-I/SS offers a balance of performance, memory, and power efficiency, making it a popular choice for a variety of embedded applications.