Microchip Technology Tariff Inquiry

PIC18F26K42-E/SP

The PIC18F26K42-E/SP is a microcontroller (MCU) from Microchip Technology's PIC18F26K42 series. It is a member of the 8-bit PIC18FXXK42 family, which is based on the enhanced mid-range core (ENHANCED MID-RANGE CORE). This MCU is designed for a wide range of embedded control applications, offering a balance of processing power, memory, and peripherals at a competitive price point.

Description:

The PIC18F26K42-E/SP is a high-performance, 8-bit, Enhanced Mid-range microcontroller with a 28-pin small-outline plastic package (SOIC). It features a high-speed CPU, ample memory, and a rich set of peripherals, making it suitable for a wide range of applications.

Features:

1. Core: Enhanced Mid-range Core with increased code execution speed and improved instruction set.
2. CPU Speed: Up to 40 MIPS (million instructions per second) performance.
3. Memory:
   • Flash Memory: 32 KB with read-while-write capability.
   • RAM: 2 KB of general-purpose RAM.
   • EEPROM: 256 x 8-bit EEPROM.
4. Input/Output (I/O): 21 digital I/O lines, with features like open-drain outputs, quasi-bidirectional inputs, and programmable mirror control.
5. Peripherals:
   • UART: Universal Asynchronous Receiver/Transmitter for serial communication.
   • SPI: Serial Peripheral Interface for high-speed communication with other SPI-enabled devices.
   • I2C: Inter-Integrated Circuit for communication with I2C devices.
   • USB: Universal Serial Bus for high-speed data transfer and device connectivity.
6. Timers: Multiple timers, including an 8-bit timer, a 16-bit timer, and a real-time clock (RTC).
7. ADC: 10-bit Analog-to-Digital Converter with up to 13 channels.
8. PWM: Pulse Width Modulation capabilities for control of motors and other applications.
9. Security: In-Circuit Serial Programming (ICSP) and In-System Programming (ISP) for secure firmware updates.
10. Power Consumption: Low-power modes to optimize energy efficiency in battery-powered applications.

Applications:

The PIC18F26K42-E/SP is suitable for a wide range of embedded control applications, including but not limited to:

1. Industrial control systems
2. Home automation and smart appliances
3. Medical devices and equipment
4. Automotive control modules
5. Consumer electronics
6. IoT devices and sensors
7. Data acquisition and signal processing systems
8. Motor control and power management
9. Security systems and access control devices
10. Communication and networking devices

The PIC18F26K42-E/SP's combination of processing power, memory, and peripherals make it a versatile choice for developers looking to implement efficient and cost-effective embedded control solutions.