Microchip Technology

PIC18F26Q10-I/SP  

Microcontrollers

Microchip Technology's PIC18F26Q10-I/SP is a high-performance microcontroller (MCU) that belongs to the PIC18F2xQ10 family. This MCU is designed for a wide range of applications, including industrial control, automotive, and consumer electronics. Here's a brief description, features, and applications of the PIC18F26Q10-I/SP:

Description:

The PIC18F26Q10-I/SP is a 16-bit flash microcontroller with enhanced performance and features. It is based on the enhanced mid-range (EMR) architecture, which provides faster execution and reduced power consumption compared to previous generations. The device comes in a 44-pin surface-mount plastic QFN (Quad Flat No-leads) package.

Features:

1. CPU Core: Enhanced mid-range (EMR) architecture with a 16-bit instruction set and a clock frequency of up to 40 MIPS.
2. Memory:
   • 128KB of Flash memory for program storage.
   • 16KB of RAM for data storage.
   • 1KB EEPROM for non-volatile data storage.
3. Peripherals:
   • Two 16-bit timers with capture/compare/PWM capabilities.
   • Eight-channel 10-bit ADC.
   • Two USARTs for serial communication.
   • SPI and I2C interfaces for high-speed data communication.
   • USB 2.0 full-speed interface with an on-chip USB transceiver.
   • Enhanced DMA controller for efficient data transfer.
4. Security: The device features secure boot, secure debug, and secure code storage to protect against unauthorized access and tampering.
5. Power Management: The MCU offers power-saving modes, including sleep, idle, and power-save modes, to optimize energy consumption.
6. Operating Voltage: The device operates over a wide voltage range of 2V to 5.5V, making it suitable for various power supply environments.
7. Temperature Range: The PIC18F26Q10-I/SP is available in commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature ranges.

Applications:

1. Industrial Control: The device's robustness and high performance make it suitable for applications like motor control, sensor interfacing, and process control in industrial environments.
2. Automotive: The PIC18F26Q10-I/SP can be used in automotive applications such as body control modules, instrument clusters, and infotainment systems.
3. Consumer Electronics: The MCU can be employed in consumer products like smart appliances, gaming consoles, and portable devices due to its USB interface and advanced communication capabilities.
4. Medical Devices: The device's precision and reliability make it suitable for medical equipment, such as monitoring devices and diagnostic tools.
5. Communication Systems: The integrated USARTs, SPI, and I2C interfaces make the PIC18F26Q10-I/SP suitable for communication systems and IoT devices.

The PIC18F26Q10-I/SP is a versatile and powerful microcontroller that can be tailored to a wide range of applications, thanks to its extensive feature set and flexible architecture.

PIC18F26Q10-I/SP Documents

Download datasheets and manufacturer documentation for PIC18F26Q10-I/SP

Errata :

PIC18F26/45/46Q10 Errata~      

Datasheets :

PIC18F26/45/46Q10 Datasheet      

PCN Design/Specification :

PIC18F26/45/46Q10 17/Sep/2019       PIC18F26/45/46Q10 11/Dec/2020      

Environmental Information :

Microchip CA Prop65       Microchip RoHS       Microchip REACH