Microchip Technology Tariff Inquiry

PIC24FJ128GL302-I/SS

The PIC24FJ128GL302-I/SS is a microcontroller (MCU) from Microchip Technology's PIC24F series. It is a 16-bit device that features a high-performance core, a rich set of peripherals, and a flexible memory architecture. Here's a detailed description of the PIC24FJ128GL302-I/SS, its features, and potential applications:

Description:

The PIC24FJ128GL302-I/SS is a member of the PIC24FJ128G family, which is based on the 16-bit dsPIC30F family core. It is a high-performance, enhanced mid-range flash microcontroller with a high-speed CPU and advanced peripherals. The device is available in a 44-pin, 7.0mm x 7.0mm, Shrink Small Outline Surface Mount (SSOP) package.

Features:

1. Core: 16-bit dsPIC30F core with a maximum CPU frequency of 40 MIPS (million instructions per second).
2. Memory:
   • 128KB of on-chip flash program memory
   • 16KB of on-chip SRAM
   • 512-byte EEPROM
3. Peripherals:
   • Up to 56 general-purpose I/O (GPIO) pins
   • 4x 16-bit timer/counters with input capture and output compare
   • 2x 10-bit analog-to-digital converters (ADCs) with up to 24 channels
   • 2x serial communication interfaces (SPI, I2C, and UART)
   • USB 2.0 full-speed device interface
   • Enhanced DMA controller
   • CRC32 with bit-addressable memory
4. Connectivity:
   • Integrated CAN 2.0B controller
   • 10/100 Ethernet MAC with MII and RMII interfaces
   • SD/SDIO/MMC host interface
5. Security:
   • Secure Digital Rights Management (SDRM)
   • Secure Debug (SDM)
   • Secure Boot (SB)
6. Power Management:
   • Low-power sleep modes
   • Power-on reset (POR) and brown-out detect (BOD)
7. Operating Voltage: 2.0V to 5.5V
8. Operating Temperature: -40°C to +125°C

Applications:

The PIC24FJ128GL302-I/SS is suitable for a wide range of applications due to its high performance, rich set of peripherals, and flexible memory architecture. Some potential applications include:

1. Industrial control systems: Motor control, robotics, and automation.
2. Automotive: Engine management, body control, and infotainment systems.
3. Medical devices: Patient monitoring, diagnostic equipment, and portable medical instruments.
4. Consumer electronics: Smart appliances, home automation, and portable devices.
5. Communication systems: Networking devices, modems, and routers.
6. Renewable energy systems: Solar power inverters, wind turbine control, and energy management systems.
7. Security systems: Access control, surveillance cameras, and alarm systems.

The PIC24FJ128GL302-I/SS's combination of processing power, memory, and peripherals make it a versatile choice for a variety of embedded systems and applications.