Microchip Technology Tariff Inquiry

PIC24FJ256GL406-E/PT

Microchip Technology's PIC24FJ256GL406-E/PT is a high-performance microcontroller (MCU) that belongs to the PIC24FJ series. This MCU is designed for a wide range of applications, including industrial control, automotive, and consumer electronics.

Description:

The PIC24FJ256GL406-E/PT is a 16-bit microcontroller based on the MIPS32 4Kc core architecture. It features a high-speed CPU with a maximum clock frequency of 80 MHz, providing excellent performance for demanding applications. The device is available in a 100-pin PT (Plastic Thermal) package.

Features:

1. Core: MIPS32 4Kc core with a maximum clock frequency of 80 MHz
2. Memory:
   • 256 KB Flash memory for program storage
   • 16 KB SRAM for data storage
   • 16 KB program memory for fast execution of code
3. Peripherals:
   • 3x 16-bit Timers/Counters
   • 2x UARTs (Universal Asynchronous Receiver/Transmitters)
   • 1x SPI (Serial Peripheral Interface)
   • 1x I2C (Inter-Integrated Circuit)
   • 1x USB (Universal Serial Bus) with on-chip PHY
   • 1x CAN (Controller Area Network) 2.0B controller
   • 1x ADC (Analog-to-Digital Converter) with 10-bit resolution and up to 20 channels
   • Enhanced DMA (Direct Memory Access) controller
4. Connectivity:
   • Integrated USB for easy connectivity and firmware upgrades
   • CAN 2.0B controller for automotive and industrial applications
5. Security:
   • Secure Debug for secure debugging and protection against reverse engineering
   • Flash memory security features, including read and write protection
6. Power Management:
   • Low-power sleep modes to conserve energy in battery-powered applications
7. Operating Voltage: 2.0V to 5.5V
8. Operating Temperature: -40°C to +125°C

Applications:

1. Industrial Control: Programmable Logic Controllers (PLCs), motor control, and sensor interfacing
2. Automotive: In-vehicle infotainment systems, body control modules, and engine management systems
3. Consumer Electronics: Smart appliances, gaming consoles, and portable devices
4. Medical Devices: Patient monitoring systems, diagnostic equipment, and wearable medical devices
5. Communication Systems: Networking devices, routers, and modems
6. Renewable Energy: Solar panel monitoring, wind turbine control, and energy storage systems

The PIC24FJ256GL406-E/PT's combination of high performance, extensive memory, and a wide range of peripherals make it a versatile choice for a variety of embedded applications. Its robust security features and power management capabilities also make it suitable for applications where data protection and energy efficiency are critical.