Microchip Technology

PIC24HJ256GP206T-I/PT  

Microcontrollers

Microchip Technology's PIC24HJ256GP206T-I/PT is a high-performance microcontroller (MCU) that belongs to the PIC24FJ series. This MCU is designed for a wide range of applications, including industrial control, automotive, and medical devices.

Description:

The PIC24HJ256GP206T-I/PT is a 16-bit MCU that features a high-performance core, large memory capacity, and a rich set of peripherals. It is based on the 8-Bit/16-Bit architecture and operates at a maximum frequency of 40 MHz. The device is available in a 28-pin package and is designed to operate over a wide temperature range of -40°C to +125°C.

Features:

1. Core: The PIC24HJ256GP206T-I/PT features a high-performance core with a maximum frequency of 40 MHz, providing fast execution of instructions and efficient power consumption.
2. Memory: The device offers a large memory capacity, including 256 KB of Flash memory, 16 KB of SRAM, and 16 KB of EEPROM.
3. Peripherals: The MCU is equipped with a range of peripherals, including UART, SPI, I2C, USB, and CAN interfaces, making it suitable for various communication protocols.
4. ADC: The device includes a 12-bit ADC with up to 20 channels, allowing for accurate analog-to-digital conversion.
5. PWM: The PIC24HJ256GP206T-I/PT features up to 6 PWM channels, which can be used for motor control, LED dimming, and other applications.
6. Security: The MCU provides advanced security features, including a secure boot, secure debug, and tamper detection.
7. Temperature Range: The device is designed to operate over a wide temperature range of -40°C to +125°C, making it suitable for harsh environments.

Applications:

The PIC24HJ256GP206T-I/PT is suitable for a wide range of applications, including:

1. Industrial Control: The MCU's high-performance core, large memory capacity, and rich set of peripherals make it ideal for industrial control applications, such as motor control, sensor interfacing, and data acquisition.
2. Automotive: The device's robustness and wide temperature range make it suitable for automotive applications, such as infotainment systems, body control modules, and engine management systems.
3. Medical Devices: The PIC24HJ256GP206T-I/PT can be used in medical devices, such as patient monitoring systems, diagnostic equipment, and portable medical instruments, thanks to its advanced security features and wide temperature range.
4. Consumer Electronics: The MCU can be used in consumer electronics, such as home appliances, smart home devices, and portable gadgets, due to its low power consumption and support for various communication protocols.
5. IoT Devices: The device's support for USB and other communication interfaces makes it suitable for Internet of Things (IoT) devices, such as smart sensors, wearables, and connected appliances.

In summary, the PIC24HJ256GP206T-I/PT is a versatile and high-performance MCU from Microchip Technology, designed for a wide range of applications, including industrial control, automotive, medical devices, consumer electronics, and IoT devices. Its advanced features, such as a high-performance core, large memory capacity, and a rich set of peripherals, make it an ideal choice for demanding applications.

PIC24HJ256GP206T-I/PT Documents

Download datasheets and manufacturer documentation for PIC24HJ256GP206T-I/PT

Errata :

PIC24HJzzzGPzzz, Rev. A0, A1Silicon Errata      

PCN Assembly/Origin :

Qualification Lead-Frame 03/Jun/2014      

Datasheets :

DSPIC33F, PIC24H Flash Programming Specification       dsPIC30F2010       PIC24HJyyyGPy06/08/10 Datasheet      

PCN Packaging :

Reel Design Update 07/May/2015       Label and Packing Changes 23/Sep/2015      

Design Resources :

PIC24HJ256GP206 Development Tool Selector      

HTML Datasheet :

16-bit Embedded Control Solutions       DSPIC33F, PIC24H Flash Programming Specification      

Environmental Information :

Microchip CA Prop65       Microchip RoHS       Microchip REACH