Nexperia

74AHCT74D-Q100J  

Flip Flops

74AHCT74D-Q100J Description

The 74AHCT74D-Q100J is a high-performance dual D-type flip-flop designed for automotive applications. Manufactured by Nexperia USA Inc., this device is part of the 74AHCT series and is optimized for reliable operation in demanding environments. The 74AHCT74D-Q100J features a clock frequency of up to 140 MHz, ensuring fast and efficient data processing. It operates within a supply voltage range of 4.5V to 5.5V, making it suitable for a variety of power supply configurations. The device is designed with a complementary output type and is triggered by a positive edge, providing precise control over data latching.

74AHCT74D-Q100J

Features- High Clock Frequency: The 74AHCT74D-Q100J supports a clock frequency of up to 140 MHz, enabling rapid data handling and synchronization.

• Low Propagation Delay: With a maximum propagation delay of 8.8ns at 5V and 50pF, this flip-flop ensures minimal latency in signal processing.
• Low Quiescent Current: Consuming only 2 µA in quiescent mode, the device is highly energy-efficient, making it ideal for applications where power consumption is a critical factor.
• Robust Power Handling: The flip-flop can handle up to 8mA of current for both high and low outputs, ensuring reliable operation under various load conditions.
• Automotive Grade: Certified for automotive applications, the 74AHCT74D-Q100J meets stringent reliability and performance standards required for use in vehicles.
• Moisture Sensitivity Level 1: The device is classified as MSL 1, indicating it is not sensitive to moisture and can be stored and handled without special precautions.
• Compliance: The 74AHCT74D-Q100J is REACH unaffected and ROHS3 compliant, ensuring it meets environmental and safety regulations.
• Surface Mount Packaging: Available in a surface mount package (Tape & Reel), the device is easy to integrate into modern PCB designs.

74AHCT74D-Q100J Applications

The 74AHCT74D-Q100J is ideal for a range of automotive applications where reliability, performance, and efficiency are paramount. Specific use cases include:

• Automotive Control Systems: Utilized in engine control units (ECUs), transmission control modules, and other critical automotive systems where precise timing and data handling are essential.
• Safety-Critical Applications: Suitable for advanced driver-assistance systems (ADAS) and other safety-critical applications that require high reliability and low latency.
• Data Synchronization: Ideal for synchronizing data between different systems within a vehicle, ensuring accurate and timely data transfer.
• Signal Processing: Used in various signal processing applications, such as sensor data acquisition and processing, where fast and reliable flip-flops are required.

Conclusion of 74AHCT74D-Q100J

The 74AHCT74D-Q100J is a versatile and high-performance dual D-type flip-flop designed to meet the stringent requirements of automotive applications. Its high clock frequency, low propagation delay, and low quiescent current make it an excellent choice for applications where speed, efficiency, and reliability are crucial. The device's automotive-grade certification and compliance with environmental regulations further enhance its suitability for modern automotive designs. Whether used in control systems, safety-critical applications, or data synchronization, the 74AHCT74D-Q100J offers a robust and reliable solution for engineers and designers in the automotive industry.

74AHCT74D-Q100J Documents

Download datasheets and manufacturer documentation for 74AHCT74D-Q100J