STMicroelectronics

STM32F070RBT6TR  

Microcontrollers

The STM32F070RBT6TR is a microcontroller unit (MCU) produced by STMicroelectronics, a leading global semiconductor company. This MCU belongs to the STM32 family, which is known for its high performance and low power consumption. Here's a detailed description of the STM32F070RBT6TR, its features, and potential applications:

Description:

The STM32F070RBT6TR is a 32-bit ARM Cortex-M0+ based MCU that is part of the STM32F0x0 Value Line series. It is designed to provide a balance between performance, power efficiency, and cost-effectiveness, making it suitable for a wide range of embedded applications.

Features:

1. Processor: It features an ARM Cortex-M0+ processor with a frequency of up to 48 MHz, which is capable of executing tasks efficiently while maintaining low power consumption.

2. Memory: The MCU includes 128 KB of Flash memory for program storage and 16 KB of RAM for data storage, providing sufficient space for small to medium-sized applications.

3. Power Management: It includes a wide operating voltage range (1.8V to 3.6V) and a low-power sleep mode, which makes it suitable for battery-powered devices.

4. Connectivity: The STM32F070RBT6TR offers various communication interfaces such as I2C, SPI, and USART, enabling it to interface with a variety of peripherals and modules.

5. Timers: It includes timers that can be used for PWM generation, input capture, output compare, and other time-related functions.

6. ADC: It has a 12-bit ADC with up to 17 channels, allowing for analog signal processing and conversion.

7. Digital Filters: The MCU features a CRC calculation unit and a 9-bit digital filter for noise reduction in signal processing.

8. Security: It includes a unique device identifier (UID) and a bootloader, which can be used for secure firmware updates and device authentication.

9. Package: The STM32F070RBT6TR comes in a 64-pin LQFP (Low Profile Quad Flat Package), which is compact and suitable for space-constrained applications.

Applications:

Given its features, the STM32F070RBT6TR is well-suited for a variety of applications, including but not limited to:

1. General Purpose Applications: It can be used in simple embedded systems where low power and moderate computational capabilities are required.

2. Portable Devices: Due to its low power consumption, it's ideal for applications in portable electronics like fitness trackers, smart watches, and portable medical devices.

3. Industrial Control: It can be used in low-end industrial control systems where reliable and efficient operation is needed.

4. Sensor Networks: Its ADC capabilities make it suitable for sensor interfacing and data acquisition in IoT devices and sensor networks.

5. Automotive Applications: It can be used in simple automotive systems like window control, lighting, and other non-critical vehicle functions.

6. Smart Home Devices: It can be integrated into smart home devices for control and communication purposes.

7. Medical Equipment: For non-critical medical equipment that requires low power and reliable operation, the STM32F070RBT6TR can be a good fit.

8. Consumer Electronics: It can be used in a wide range of consumer electronics where cost, power efficiency, and moderate processing capabilities are important.

The STM32F070RBT6TR is a versatile MCU that, due to its balance of performance and power efficiency, can be a good choice for a wide range of embedded systems and applications.

STM32F070RBT6TR Documents

Download datasheets and manufacturer documentation for STM32F070RBT6TR

Errata :

STM32F070x6, xB Errata      

Datasheets :

STM32F070xB, 6x Datasheet      

Other Related Documents :

STM32F030, 070 Reference Manual      

HTML Datasheet :

STM32F070xB, 6x Datasheet