STMicroelectronics

STM32F103TBU6TR  

Microcontrollers

The STM32F103TBU6TR is a high-performance microcontroller from STMicroelectronics, which belongs to the popular STM32 family of microcontrollers. It is based on the powerful ARM Cortex-M3 32-bit RISC core, operating at a maximum frequency of 72 MHz. This microcontroller is designed for a wide range of applications, including industrial control, consumer electronics, and automotive systems.

Description:

The STM32F103TBU6TR is a 32-bit microcontroller that features an ARM Cortex-M3 core, providing high performance and low power consumption. It is available in a 176-ball LQFP (Low Profile Quad Flat Package) package, making it suitable for a variety of applications with space constraints.

Features:

1. ARM Cortex-M3 32-bit RISC core with a maximum frequency of 72 MHz.
2. 512 KB of Flash memory for program storage.
3. 64 KB of SRAM for data storage and program execution.
4. Flexible clock system with internal and external clock sources.
5. Advanced peripherals, including:
   • 3x UARTs (Universal Asynchronous Receiver/Transmitter)
   • 2x SPIs (Serial Peripheral Interface)
   • 2x I2Cs (Inter-Integrated Circuit)
   • 2x CANs (Controller Area Network) for automotive and industrial applications
   • 2x USB 2.0 interfaces (1x device, 1x host)
   • 1x SDIO (Secure Digital Input Output)
   • 1x Ethernet MAC with 70-byte Rx FIFO and IEEE 1588v2 support
6. 2x 12-bit ADCs (Analog-to-Digital Converters) with up to 18 channels.
7. 2x 12-bit DACs (Digital-to-Analog Converters).
8. 8-channel DMA (Direct Memory Access) controller for efficient data transfer.
9. CRC (Cyclic Redundancy Check) calculation unit for error detection.
10. Programmable watchdog timer and SysTick timer for system monitoring and profiling.

Applications:

The STM32F103TBU6TR microcontroller is suitable for a wide range of applications due to its high performance, advanced peripherals, and flexible clock system. Some of the key applications include:

1. Industrial control systems: The STM32F103TBU6TR can be used in motor control, sensor interfacing, and data acquisition systems.
2. Consumer electronics: The microcontroller can be used in smart appliances, wearable devices, and portable electronics.
3. Automotive systems: The two CAN interfaces make it suitable for automotive applications, such as infotainment systems, body control modules, and engine control units.
4. Networking and communication: The Ethernet MAC and USB interfaces enable the microcontroller to be used in networking devices, IoT gateways, and communication systems.
5. Medical devices: The STM32F103TBU6TR can be used in medical equipment, such as patient monitoring systems and diagnostic devices.
6. Robotics: The microcontroller can be used in robotic control systems, including actuators, sensors, and communication interfaces.

In summary, the STM32F103TBU6TR is a versatile and powerful microcontroller that can be used in various applications, thanks to its high-performance ARM Cortex-M3 core, advanced peripherals, and flexible clock system.

STM32F103TBU6TR Documents

Download datasheets and manufacturer documentation for STM32F103TBU6TR

Datasheets :

STM32F103x(8,B) Datasheet      

Manuals :

STM32F10zzz Ref Manual      

Reference Design Library :

STEVAL-IHM034V2: 1300W Sensorless 3-Phase PMSM Dual Motor Control