STMicroelectronics

STM32F103ZGH6JTR  

Microcontrollers

The STM32F103ZGH6JTR is a high-performance microcontroller (MCU) developed by STMicroelectronics. It belongs to the STM32 family of ARM Cortex-M3 core-based MCUs, which are designed for a wide range of applications, from consumer electronics to industrial control systems.

Description:

The STM32F103ZGH6JTR is a 32-bit microcontroller based on the ARM Cortex-M3 core, operating at a frequency of up to 72 MHz. It features a 256 KB flash memory and 64 KB of RAM, making it suitable for applications that require moderate memory capacity. The device is available in a LQFP144 package, which provides a high-density pin count for flexible integration into various systems.

Features:

1. ARM Cortex-M3 core with a clock speed of up to 72 MHz.
2. 256 KB of flash memory and 64 KB of RAM.
3. Flexible clock system with internal and external clock sources.
4. Advanced peripherals, including:
   • 3x UARTs (Universal Asynchronous Receiver/Transmitter)
   • 2x SPI (Serial Peripheral Interface) controllers
   • 2x I2C (Inter-Integrated Circuit) interfaces
   • 2x CAN (Controller Area Network) controllers
   • 1x USB 2.0 full-speed device/host/OTG controller
   • 1x SDIO (Secure Digital Input Output) interface
   • 1x DMA (Direct Memory Access) controller
   • 1x CRC (Cyclic Redundancy Check) calculation unit
   • 1x ADC (Analog-to-Digital Converter) with up to 18 channels
   • 1x DAC (Digital-to-Analog Converter) channel
   • 1x RTC (Real-Time Clock)
5. On-chip debugging and programming support with JTAG and SWD (Serial Wire Debug) interfaces.
6. Power management features, including a low-power sleep mode and power scaling capabilities.
7. Advanced security features, such as a unique 128-bit UID (Unique Identification) and protection against reverse engineering.

Applications:

The STM32F103ZGH6JTR is suitable for a wide range of applications due to its high performance, advanced peripherals, and flexible clock system. Some potential applications include:

1. Industrial control systems: The STM32F103ZGH6JTR can be used in motor control, sensor interfacing, and data acquisition systems.
2. Consumer electronics: The MCU can be employed in devices such as smart appliances, wearable devices, and portable electronics.
3. Automotive systems: The STM32F103ZGH6JTR can be used in various automotive applications, including infotainment systems, body control modules, and engine control units.
4. Medical devices: The MCU can be utilized in medical equipment, such as monitoring systems, diagnostic devices, and portable medical instruments.
5. Communication systems: The STM32F103ZGH6JTR can be employed in networking devices, such as routers, switches, and IoT gateways.
6. Embedded systems: The MCU is suitable for various embedded applications, including robotics, human-machine interface (HMI) systems, and data logging systems.

In summary, the STM32F103ZGH6JTR is a versatile and powerful microcontroller that can be used in a wide range of applications, thanks to its high-performance ARM Cortex-M3 core, advanced peripherals, and flexible clock system.

STM32F103ZGH6JTR Documents

Download datasheets and manufacturer documentation for STM32F103ZGH6JTR

Datasheets :

STM32F103xF, STM32F103xG      

Reference Design Library :

STEVAL-IHM034V2: 1300W Sensorless 3-Phase PMSM Dual Motor Control      

HTML Datasheet :

STM32F103xF, STM32F103xG