STMicroelectronics

STM32F401CCU6

The STM32F401CCU6 is a microcontroller unit (MCU) from STMicroelectronics, which belongs to the STM32 family of 32-bit ARM Cortex-M4 processors. This particular model is designed for a wide range of applications, including industrial control, medical equipment, and consumer electronics.

Description:

The STM32F401CCU6 is a high-performance MCU featuring an ARM Cortex-M4 CPU with a 84 MHz maximum frequency, 256 KB of Flash memory, and 64 KB of SRAM. It is packaged in a 100-pin LQFP (Low Profile Quad Flat Package) package.

Features:

1. ARM Cortex-M4 CPU with FPU (Floating Point Unit) running at up to 84 MHz.
2. 256 KB of Flash memory for program storage.
3. 64 KB of SRAM for data storage and execution.
4. Flexible clock source options, including an internal RC oscillator, external oscillator, or PLL (Phase-Locked Loop) for system clock generation.
5. Advanced memory protection unit (MPU) for secure data handling.
6. DMA (Direct Memory Access) controller for efficient data transfer between peripherals and memory.
7. A wide range of communication interfaces, including:
   • 2x I2C (Inter-Integrated Circuit)
   • 3x USART (Universal Synchronous/Asynchronous Receiver-Transmitter)
   • 2x SPI (Serial Peripheral Interface)
   • 1x CAN (Controller Area Network)
8. USB OTG (On-The-Go) interface for USB connectivity.
9. 12-bit ADC (Analog-to-Digital Converter) with up to 16 channels.
10. Flexible timers, including basic timers, advanced control timers, and real-time timers.
11. CRC (Cyclic Redundancy Check) calculation unit for error detection.
12. RTC (Real-Time Clock) with backup registers for low-power applications.
13. Power management features, including voltage monitoring, low-power sleep modes, and I/O pins with configurable power supply.

Applications:

The STM32F401CCU6 is suitable for a variety of applications due to its powerful CPU, rich set of peripherals, and flexible memory options. Some potential applications include:

1. Industrial control systems: Programmable logic controllers (PLCs), motor control, and sensor interfacing.
2. Medical equipment: Patient monitoring devices, medical imaging, and portable medical instruments.
3. Consumer electronics: Smart home devices, wearable electronics, and portable multimedia devices.
4. Automotive applications: Infotainment systems, body control modules, and power management systems.
5. IoT (Internet of Things) devices: Smart sensors, gateways, and data acquisition systems.
6. Robotics: Robotic control systems, actuators, and sensor processing.
7. Embedded systems: General-purpose embedded applications requiring real-time processing and connectivity.

The STM32F401CCU6's versatility and performance make it a popular choice for developers looking to create efficient and reliable solutions across various industries.