STMicroelectronics

STM32G031F4P3  

Microcontrollers

STMicroelectronics' STM32G031F4P3 is a microcontroller unit (MCU) belonging to the STM32G0 series. It is designed for a wide range of applications, offering a balance between performance, power efficiency, and cost-effectiveness. Here's a description of the STM32G031F4P3, including its features and potential applications:

Description:

The STM32G031F4P3 is a 32-bit ARM Cortex-M0+ based MCU, featuring a maximum CPU frequency of 64 MHz. It is manufactured using ST's advanced 120 nm process technology, ensuring low power consumption and high performance. The device comes in a compact 48-pin LQFP package, making it suitable for a variety of applications where space is a constraint.

Features:

1. Processor: 32-bit ARM Cortex-M0+ core with a maximum CPU frequency of 64 MHz.
2. Memory: 16 Kbytes of Flash memory and 4 Kbytes of RAM.
3. Low Power: Offers a wide range of low-power modes, including Stop and Standby modes, to extend battery life in portable applications.
4. I/O Ports: Multiple I/O ports with programmable input/output configurations, supporting various communication protocols.
5. Timers: Advanced timers, including a 16-bit timer with PWM and dead-time insertion, and a low-power timer.
6. Communication Interfaces: I2C, USART, and SPI communication interfaces for connecting to various peripherals.
7. Analog-to-Digital Converter (ADC): 1x 12-bit ADC with up to 16 channels.
8. Digital-to-Analog Converter (DAC): 1x 12-bit DAC.
9. Security: Features a hardware unique identifier and protection against unauthorized code execution.
10. Package: 48-pin LQFP package.

Applications:

1. Industrial Control: The STM32G031F4P3 can be used in industrial control systems for motor control, sensor interfacing, and process automation.
2. Consumer Electronics: Suitable for applications in smart appliances, wearable devices, and portable electronics, thanks to its low power consumption and compact form factor.
3. Medical Devices: Can be employed in low-power medical devices, such as portable monitoring systems and diagnostic equipment.
4. Smart Sensors: Ideal for developing smart sensors for environmental monitoring, industrial automation, and IoT applications.
5. Energy Management: The MCU can be used in energy management systems for efficient power control and monitoring.
6. Automotive: Suitable for low-power automotive applications, such as infotainment systems, body control modules, and sensor hubs.

The STM32G031F4P3's combination of performance, power efficiency, and a wide range of features make it an excellent choice for various applications, from industrial control to consumer electronics and beyond.

STM32G031F4P3 Documents

Download datasheets and manufacturer documentation for STM32G031F4P3

Datasheets :

STM32G031x(4,6,8) Datasheet       Getting Started with STM32CubeG0 for STM32G0 Series       STM32G031x4, STM32G031x6, STM32G031x8 Datasheet      

HTML Datasheet :

Getting Started with STM32CubeG0 for STM32G0 Series       STM32G031x4, STM32G031x6, STM32G031x8 Datasheet      

PCN Design/Specification :

STM32G03x/STM32G04x 22/Jan/2023