STMicroelectronics

STM32L152CBT6  

Microcontrollers

The STM32L152CBT6 is a low-power microcontroller from STMicroelectronics, which belongs to the STM32L1 series. It is designed for a wide range of applications that require low power consumption and high performance. Here's a brief description, features, and applications of the STM32L152CBT6:

Description:

The STM32L152CBT6 is a 32-bit ARM Cortex-M3 CPU-based microcontroller with a maximum CPU frequency of 32 MHz. It is manufactured using a 90-nm low-power CMOS process technology. The device comes in a 64-pin LQFP (Leaded Quad Flat Package) package.

Features:

1. ARM Cortex-M3 processor with a maximum CPU frequency of 32 MHz
2. 256 KB of Flash memory
3. 32 KB of SRAM
4. Flexible external memory controller with support for SRAM, PSRAM, and NOR Flash memory
5. 2 DMA controllers with a total of 12 channels for efficient data transfer
6. Advanced control for analog-to-digital converter (ADC) with up to 24 channels
7. 5x 12-bit ADC with up to 1 Msps conversion rate
8. 2x 12-bit DAC with buffer output
9. RTC with sub-second accuracy
10. Ultra-low-power sleep mode with a runtime of over 10 years on a single coin cell battery
11. Wide operating voltage range (1.8V to 3.6V)
12. Up to 114 GPIO pins with multiple I/O options
13. On-chip debug support with SWD (Serial Wire Debug) interface
14. Support for various communication interfaces, including:
    • I2C (2x)
    • SPI (4x)
    • USART (3x)
    • USB 2.0 full-speed device
15. CRC calculation unit
16. True random number generator (TRNG)

Applications:

The STM32L152CBT6 is suitable for a wide range of applications that require low power consumption and high performance. Some of the key applications include:

1. Battery-powered devices: Due to its ultra-low-power features, the STM32L152CBT6 is ideal for devices that run on batteries, such as portable medical devices, fitness trackers, and smart watches.
2. Smart sensors: The STM32L152CBT6 can be used in smart sensor applications, such as environmental monitoring, industrial automation, and building automation systems.
3. Home automation: The microcontroller can be used in smart home applications, such as smart lighting, HVAC control, and security systems.
4. Medical devices: The STM32L152CBT6 can be used in medical devices that require low power consumption and high reliability, such as portable diagnostic equipment and wearable medical devices.
5. Industrial control: The microcontroller can be used in industrial control applications, such as motor control, energy management, and process control systems.
6. Consumer electronics: The STM32L152CBT6 can be used in various consumer electronics applications, such as portable gaming devices, audio equipment, and remote controls.

The STM32L152CBT6's combination of low power consumption, high performance, and a wide range of features make it a versatile choice for a variety of applications.

STM32L152CBT6 Documents

Download datasheets and manufacturer documentation for STM32L152CBT6

PCN Assembly/Origin :

STM32L1x 17/Nov/2022      

Datasheets :

STM32L15xx(6, 8, B)      

HTML Datasheet :

STM32L15xx(6, 8, B)      

PCN Design/Specification :

Mult Dev Des Improv 24/Nov/2022