Texas Instruments

ADS1294IPAG  

Analog Front End

The ADS1294IPAG is a high-performance, low-power, 12-lead integrated circuit (IC) from Texas Instruments that is designed for biopotential signal acquisition. It is specifically designed for use in medical and healthcare applications, such as electrocardiogram (ECG), electroencephalogram (EEG), and electromyogram (EMG) monitoring.

Description:

The ADS1294IPAG is a fully integrated, low-noise, biopotential signal amplifier that provides high accuracy and high resolution. It features a 24-bit, 250-samples-per-second (SPS) analog-to-digital converter (ADC) with input ranges of ±5 mV, ±25 mV, ±50 mV, ±100 mV, ±250 mV, and ±500 mV. The device also includes a built-in right-leg-drive (RLD) circuit to help reduce common-mode interference.

Features:

1. Low-noise, high-accuracy biopotential signal amplifier
2. 24-bit, 250-SPS ADC with selectable input ranges
3. Built-in RLD circuit for reduced common-mode interference
4. Low power consumption (typical 13.5 mA)
5. Small 12-lead QFN package
6. Wide supply voltage range (2.3 V to 3.6 V)
7. Programmable gain amplifier (PGA) with six gain settings
8. On-chip 50-Hz or 60-Hz notch filter
9. DC offset correction
10. Internal or external reference options

Applications:

1. Medical-grade ECG, EEG, and EMG monitoring
2. Wearable healthcare devices
3. Telemedicine and remote patient monitoring
4. Medical research and clinical trials
5. Fitness and wellness devices
6. Stress and sleep analysis
7. Medical diagnostic equipment

The ADS1294IPAG is a versatile and high-performance solution for biopotential signal acquisition in various medical and healthcare applications. Its low-noise amplifier, high-resolution ADC, and built-in features make it an ideal choice for accurate and reliable monitoring of physiological signals.

ADS1294IPAG Documents

Download datasheets and manufacturer documentation for ADS1294IPAG

PCN Assembly/Origin :

Wafer Fab 22/Mar/2023      

Datasheets :

ADS1294,296,298(R)      

HTML Datasheet :

ADS1294,296,298(R)      

PCN Design/Specification :

Copper Bond Wire Revision A 04/Dec/2013