Texas Instruments

CAXC8T245QRHLRQ1  

Buffers, Drivers, Receivers, Transceivers

The CAXC8T245QRHLRQ1 is a part from Texas Instruments, which is a reputable manufacturer of electronic components and semiconductors. Here is a description of the model, its features, and potential applications:

Model Description:

The CAXC8T245QRHLRQ1 is a part of Texas Instruments' line of ICs (Integrated Circuits). It is a high-speed, low-power, 8-bit, bidirectional data switch that provides a flexible and efficient solution for data routing and communication between different devices.

Features:

1. High-Speed Operation: The device is designed to operate at high speeds, making it suitable for applications that require rapid data transfer.

2. Low Power Consumption: Despite its high-speed capabilities, the CAXC8T245QRHLRQ1 is designed to consume low power, which is beneficial for battery-powered or power-sensitive applications.

3. Bidirectional Communication: The device allows for bidirectional data flow, meaning it can transmit and receive data simultaneously, enhancing its versatility.

4. 8-bit Data Width: It supports an 8-bit data width, which is a common standard for many applications, providing a balance between data capacity and processing efficiency.

5. I2C-Compatible: The device is compatible with the I2C (Inter-Integrated Circuit) communication protocol, a two-wire serial computer bus that is widely used in electronic devices for attaching low-speed peripherals to a processor.

6. Hot Swap Capability: It supports hot swapping, which allows devices to be connected and disconnected without rebooting the system, enhancing user convenience and system reliability.

7. ESD Protection: The device includes electrostatic discharge (ESD) protection, which safeguards it from damage due to static electricity.

Applications:

1. IoT Devices: Internet of Things (IoT) devices often require efficient data routing and communication capabilities, making the CAXC8T245QRHLRQ1 a suitable choice.

2. Automotive Electronics: In automotive applications, where data speed and power efficiency are crucial, this device can be used for in-vehicle networking and communication systems.

3. Industrial Automation: For industrial control systems that require robust and reliable data communication, the CAXC8T245QRHLRQ1 can be an ideal component.

4. Medical Equipment: In medical devices where data integrity and low power consumption are important, this IC can be used for interfacing with various sensors and diagnostic equipment.

5. Consumer Electronics: In consumer electronics, such as smartphones, tablets, and laptops, this IC can facilitate efficient data transfer between different components.

6. Data Centers: In high-speed data centers, the CAXC8T245QRHLRQ1 can be used for routing and switching data between servers and storage devices.

7. Power Management Systems: For systems that require efficient power management, such as in renewable energy applications, this IC can help optimize power usage.

Please note that the actual suitability of the CAXC8T245QRHLRQ1 for specific applications would depend on the detailed technical requirements and design considerations of the system it is intended for. Always refer to the manufacturer's datasheet for the most accurate and detailed information.

CAXC8T245QRHLRQ1 Documents

Download datasheets and manufacturer documentation for CAXC8T245QRHLRQ1

Datasheets :

SN74AXC8T245-Q1      

PCN Packaging :

Mult Dev Bubble Wrap Chg 8/Jul/2021