Texas Instruments

MSP430V336IPNR

MSP430V336IPNR is a low-power, 16-bit microcontroller (MCU) from Texas Instruments (TI) that belongs to the MSP430 Value Line series. It is designed for a wide range of applications, including industrial, consumer, and medical devices. Here's a description of the MSP430V336IPNR, its features, and potential applications:

Description:

The MSP430V336IPNR is an MCU built on a 16-bit RISC architecture, featuring a high code density, a wide range of peripherals, and a low-power consumption. It is housed in a 48-pin LQFP (Low Profile Quad Flat Package) package.

Features:

1. CPU: 16-bit RISC CPU with high code efficiency, offering up to 25 instructions per clock cycle.
2. Clock Speed: The device operates at a maximum clock speed of 8 MHz.
3. Memory: 8 KB of on-chip flash memory for program storage, 256 bytes of RAM, and 512 bytes of information memory.
4. Power Management: Ultra-low power consumption with multiple low-power modes, including LPM0 to LPM3 and a real-time clock (RTC) power mode.
5. ADC: 8-channel, 10-bit analog-to-digital converter (ADC) with sample-and-hold circuitry.
6. Timers: 2 configurable timer modules with capture/compare functionality.
7. Communication Interfaces: 2 UARTs (Universal Asynchronous Receiver/Transmitters), 1 I2C, and 1 SPI (Serial Peripheral Interface).
8. Peripherals: Watchdog timer, real-time clock (RTC), and up to 26 I/O ports with various input/output options.
9. Security: The device features a password-protected segment of memory to protect the code and data from unauthorized access.
10. Operating Voltage: 2.2V to 3.6V (active mode) and 1.8V to 3.6V (standby and halt mode).
11. Operating Temperature Range: -40°C to 85°C (industrial) and -40°C to 105°C (extended industrial).

Applications:

1. Industrial Control: The MSP430V336IPNR can be used in motor control, sensor interfacing, and data acquisition systems.
2. Consumer Electronics: Suitable for applications like smart appliances, portable devices, and battery-powered gadgets.
3. Medical Devices: Can be used in portable medical equipment, wearable health monitors, and medical sensors.
4. Energy Management: Ideal for energy harvesting systems, power monitoring, and energy-efficient applications.
5. Automotive: Suitable for low-power applications within the automotive industry, such as tire pressure monitoring systems and infotainment systems.
6. Sensing and Measurement: Can be used in applications involving temperature, humidity, pressure, and other environmental sensing.

The MSP430V336IPNR's combination of low power consumption, high code efficiency, and a wide range of peripherals make it a versatile choice for a variety of embedded applications.