Texas Instruments

SN74CB3Q3306ADCUR  

Encoders, Decoders, Multiplexers & Demultiplexers

The Texas Instruments SN74CB3Q3306ADCUR is a high-performance, 3-to-16 line decoder/demultiplexer that is designed to be used in a variety of digital applications. Here is a description of the model, its features, and potential applications:

Description:

The SN74CB3Q3306ADCUR is a member of the 74CB3-QFN family of decoders from Texas Instruments. It is a 3-to-16 line decoder/demultiplexer that is available in a small-outline, surface-mount package. The device is designed to be used in digital systems where it can be used to control the routing of digital signals to different destinations based on the input address lines.

Features:

1. 3-to-16 line decoding: The SN74CB3Q3306ADCUR can decode up to three input address lines and control the routing of signals to one of 16 different output lines.
2. Active-low outputs: The device has active-low outputs, which means that the output lines are pulled high by default and are only driven low when the corresponding input address line is active.
3. High-speed operation: The SN74CB3Q3306ADCUR is designed for high-speed operation, with a propagation delay of only 5.5 ns (typical) and a maximum propagation delay of 12 ns.
4. Low power consumption: The device has a low power consumption of only 1.9 mW per output line, making it suitable for battery-powered or energy-sensitive applications.
5. Wide operating voltage range: The SN74CB3Q3306ADCUR can operate over a wide range of supply voltages, from 2.0 V to 3.6 V, making it suitable for a variety of different power supply configurations.

Applications:

The SN74CB3Q3306ADCUR can be used in a variety of digital applications, including:

1. Digital signal routing: The device can be used to control the routing of digital signals in complex digital systems, such as routers, switches, and other network equipment.
2. Display control: The SN74CB3Q3306ADCUR can be used to control the selection of different segments or characters in a digital display, such as an LCD or LED display.
3. Data multiplexing: The device can be used to multiplex multiple data signals onto a single bus line, reducing the number of wires required in a digital system.
4. Address decoding: The SN74CB3Q3306ADCUR can be used to decode memory addresses in computer systems, allowing access to different memory locations based on the input address lines.
5. Control logic: The device can be used in control logic circuits, where it can be used to control the flow of data or signals based on input conditions.

Overall, the Texas Instruments SN74CB3Q3306ADCUR is a versatile and high-performance decoder/demultiplexer that can be used in a variety of digital applications where signal routing and control are required. Its small size, low power consumption, and wide operating voltage range make it a popular choice for designers looking for a reliable and efficient solution for their digital systems.

SN74CB3Q3306ADCUR Documents

Download datasheets and manufacturer documentation for SN74CB3Q3306ADCUR

Images :

Mechanical Outline Drawing      

PCN :

Product Change Notification (PDF)      

Models :

SN74CB3Q3306ADCUR Symbol & Footprint by SnapMagic      

Product Catalogs :

Logic Guide (Rev. AB)      

SPICE Models :

HSPICE Model for SN74CB3Q3306A