Texas Instruments

TL3414AID  

OP Amps, Buffer Amps ICs

TL3414AID Description

The TL3414AID from Texas Instruments is a dual general-purpose operational amplifier designed for a wide range of precision analog applications. Packaged in an 8-pin SOIC and supplied in a tube, this IC operates over a 3V to 15V supply range, making it versatile for both low and moderate voltage systems. With a 2 MHz gain bandwidth product (GBW) and a 1.3V/µs slew rate, it delivers stable performance in signal conditioning, filtering, and amplification tasks. The device features low input bias current (300 nA) and low offset voltage (2 mV), ensuring accuracy in sensitive circuits. Its 4mA supply current and 70mA output current capability balance power efficiency with drive strength, suitable for portable and industrial applications.

TL3414AID Features

• Wide Supply Range (3V–15V): Supports flexible power configurations.
• Low Power Consumption (4mA): Ideal for battery-operated devices.
• High Output Drive (70mA): Capable of driving heavier loads than typical op-amps.
• Low Input Bias Current (300 nA): Minimizes errors in high-impedance circuits.
• Moderate GBW (2 MHz) & Slew Rate (1.3V/µs): Balances speed and stability for general-purpose use.
• ROHS3 Compliant & REACH Unaffected: Meets environmental and regulatory standards.
• Dual Op-Amp Configuration: Saves board space in multi-channel designs.

TL3414AID Applications

• Sensor Signal Conditioning: Amplifies low-level signals from thermocouples, strain gauges, or photodiodes.
• Active Filters: Suitable for low-to-medium frequency filter designs (e.g., audio or instrumentation).
• Portable Electronics: Powers analog stages in handheld devices due to low current draw.
• Industrial Control Systems: Interfaces with transducers and actuators in automation setups.
• Voltage Followers/Buffers: Provides impedance matching with minimal distortion.

Conclusion of TL3414AID

The TL3414AID is a cost-effective, versatile dual op-amp offering a balanced mix of precision, power efficiency, and output drive. Its wide supply range and robust performance make it a reliable choice for general-purpose analog designs, particularly in portable, industrial, and sensor-based systems. Compared to similar models, it stands out with higher output current and lower input bias, addressing challenges in driving loads and high-Z signal chains. For engineers seeking a drop-in solution for amplification and buffering, this IC delivers consistent performance under varying operational conditions.

TL3414AID Documents

Download datasheets and manufacturer documentation for TL3414AID

Datasheets :

TL3414A      

HTML Datasheet :

TL3414A      

PCN Design/Specification :

Mult Devices Font 21/Apr/2018       Design 25/Feb/2022