Texas Instruments

TS12A12511DCNR  

Analog Switches, Multiplexers, Demultiplexers

The Texas Instruments TS12A12511DCNR is a high-performance, single-channel, 12-bit, rail-to-rail input and output (RRIO) operational amplifier (op-amp). It is designed to provide excellent precision and accuracy in a wide range of applications, including data acquisition systems, precision instrumentation, and industrial control systems.

Description:

The TS12A12511DCNR is a monolithic integrated circuit that features a single operational amplifier in an 8-pin dual-inline package (DIP-8). It is designed to operate from a single supply voltage ranging from 3.3V to 10V, making it suitable for low-voltage applications. The device has a quiescent current of 1.1mA, which is relatively low compared to other op-amps in its class.

Features:

1. Precision and accuracy: The TS12A12511DCNR offers excellent precision and accuracy, with a maximum input offset voltage of ±1μV and a maximum input bias current of ±1pA.
2. Rail-to-rail input and output: The device can operate with input signals that go all the way to the supply rails, and it can also drive its output to within a few millivolts of the supply rails.
3. Low noise: The op-amp features a low input voltage noise of 7.5nV/√Hz, which is beneficial for applications that require low-noise amplification.
4. Wide supply voltage range: The TS12A12511DCNR can operate from a supply voltage of 3.3V to 10V, making it suitable for low-voltage applications.
5. Low quiescent current: The device has a low quiescent current of 1.1mA, which helps reduce power consumption in battery-powered applications.

Applications:

1. Data acquisition systems: The precision and accuracy of the TS12A12511DCNR make it an excellent choice for use in data acquisition systems, where accurate amplification of small signals is crucial.
2. Precision instrumentation: The low input offset voltage and low input bias current of the op-amp make it suitable for use in precision instrumentation applications, such as pH meters, pressure sensors, and temperature sensors.
3. Industrial control systems: The rail-to-rail input and output capabilities, along with the low noise performance, make the TS12A12511DCNR suitable for use in industrial control systems, where accurate signal processing is required.
4. Medical equipment: The precision and low-noise characteristics of the op-amp make it suitable for use in medical equipment, such as patient monitoring systems and diagnostic equipment.
5. Battery-powered applications: The low quiescent current of the TS12A12511DCNR makes it an energy-efficient choice for battery-powered applications, such as portable measurement instruments and wireless sensor networks.

TS12A12511DCNR Documents

Download datasheets and manufacturer documentation for TS12A12511DCNR

Datasheets :

TS12A12511      

HTML Datasheet :

TS12A12511