TT Electronics/IRC

GUS-QS8A-02-7150-FF

GUS-QS8A-02-7150-FF Description

The GUS-QS8A-02-7150-FF from TT Electronics/IRC is a high-performance thin-film resistor network designed for precision applications in demanding electronic circuits. This 16-pin QSOP (Quarter Small Outline Package) device features 8 isolated resistors, each with a 715Ω resistance value, 1% tolerance, and a ±50ppm/°C temperature coefficient, ensuring stable performance across a wide temperature range of 70°C to 125°C. With a 0.75W (3/4W) total power rating (0.1W per resistor) and a maximum voltage rating of 100V, this surface-mount network is engineered for reliability in compact, high-density PCB designs. Its gull-wing termination and 0.64mm terminal pitch facilitate easy soldering and automated assembly.

GUS-QS8A-02-7150-FF Features

• Precision Thin-Film Technology: Delivers low noise, high stability, and tight tolerance (±1%) for critical analog and digital circuits.
• Isolated Resistor Configuration (ISOL): Each of the 8 resistors operates independently, eliminating crosstalk and enabling flexible circuit design.
• Robust Power Handling: Supports 0.75W total power dissipation (0.1W per resistor) with derated performance up to 125°C.
• Compact QSOP Package: Measures just 4.9mm (L) × 6.02mm (D) × 1.47mm (H), ideal for space-constrained applications.
• Automated Assembly-Friendly: Gull-wing leads and standardized QSOP footprint ensure compatibility with pick-and-place systems.
• Non-Automotive/Non-PPAP: Suitable for industrial, telecom, and consumer electronics where PPAP compliance is not required.

GUS-QS8A-02-7150-FF Applications

This resistor network excels in:

• Signal Conditioning Circuits: Precision voltage dividers, feedback networks, and sensor interfaces in instrumentation.
• Communication Systems: Impedance matching and termination in high-frequency RF/microwave modules.
• Medical Electronics: Patient monitoring devices where low drift and reliability are critical.
• Test & Measurement Equipment: Calibration circuits and reference networks requiring long-term stability.
• Industrial Control Systems: Isolated signal paths in PLCs and motor drives.

Conclusion of GUS-QS8A-02-7150-FF

The GUS-QS8A-02-7150-FF combines thin-film precision, compact packaging, and isolated resistor topology to address challenges in modern electronics. While not RoHS-compliant, its high power density, low TCR, and 1% tolerance make it a superior choice over thicker-film networks in applications demanding accuracy and thermal resilience. Its QSOP-16 footprint bridges the gap between miniaturization and performance, catering to designers prioritizing repeatability and space efficiency.