Microchip Technology Tariff Inquiry

AT90CAN64-15MT1

The AT90CAN64-15MT1 is a microcontroller unit (MCU) produced by Microchip Technology. This MCU belongs to the AT90CAN series, which is designed for automotive applications and is based on the enhanced AVR RISC architecture.

Description:

The AT90CAN64-15MT1 is a 64-pin, 8-bit MCU with 64 KB of In-System Programmable Flash memory, 4 KB of SRAM, and 2 KB of EEPROM. It operates at a frequency of up to 16 MHz and is equipped with a Controller Area Network (CAN) 2.0B interface for communication.

Features:

1. Enhanced AVR RISC architecture with 128 general-purpose working registers.
2. 64 KB of In-System Programmable Flash memory with read-while-write capability.
3. 4 KB of SRAM and 2 KB of EEPROM.
4. Up to 40 general-purpose I/O lines with optional pull-up resistors.
5. CAN 2.0B interface for communication.
6. On-chip 8 MHz RC oscillator with calibration.
7. Optional external oscillator support.
8. Two watchdog timers with separate programmable intervals.
9. Two 16-bit timer/counters with 8-bit resolution and PWM channels.
10. 8-channel, 10-bit ADC with up to 8 analog inputs.
11. Two USARTs for serial communication.
12. On-chip debug system with JTAG and Serial Wire Debug (SWD) interfaces.
13. Sleep, power-save, power-down, and standby modes for low-power operation.
14. Advanced boot loader with security features.

Applications:

The AT90CAN64-15MT1 is designed for automotive applications that require robust communication and control capabilities. Some potential applications include:

1. Engine management systems.
2. Anti-lock braking systems (ABS).
3. Electronic stability control (ESC) systems.
4. Body control modules.
5. Instrument clusters.
6. Infotainment systems.
7. CAN bus-based communication networks in vehicles.
8. Industrial control systems that require robust communication and low-power operation.

The AT90CAN64-15MT1's combination of processing power, memory, and communication capabilities make it suitable for a wide range of automotive and industrial applications where reliable and efficient control is essential.