Microchip Technology Tariff Inquiry

ATMEGA128-16MNR

The ATMEGA128-16MNR is a microcontroller unit (MCU) produced by Microchip Technology. It belongs to the ATmega family of 8-bit AVR microcontrollers, which are widely used in various embedded systems and applications due to their high performance, low power consumption, and ease of use.

Description:

The ATMEGA128-16MNR is a high-density, integrated circuit (IC) featuring a rich set of on-chip functionality. It is housed in a 64-pin QFN (Quad Flat No-leads) package, making it suitable for space-constrained applications.

Features:

1. CPU: 8-bit AVR RISC-based microcontroller with a clock frequency of up to 16 MHz.
2. Memory: 128KB of In-System Programmable (ISP) Flash memory, 16KB of SRAM, and 4KB of EEPROM.
3. I/O: 49 general-purpose I/O pins with support for various I/O modes, including digital, analog, and PWM.
4. ADC: 8-channel, 10-bit Analog-to-Digital Converter (ADC) with a maximum throughput of 100ksps.
5. Communication interfaces: 2 USARTs (Universal Synchronous/Asynchronous Receiver/Transmitter) for serial communication, and a 2-wire Serial Interface (TWI).
6. Timers: 4 Timer/Counters with various modes and resolutions, including a high-resolution PWM mode.
7. Interrupts: 31 interrupt sources with configurable priority levels.
8. Power management: I/O pins with programmable sleep modes, power reduction features, and a power-on reset (POR) circuit.
9. Security: JTAG (Joint Test Action Group) interface for debugging and programming, and a bootloader for secure firmware updates.
10. Operating temperature range: -40°C to +85°C.

Applications:

The ATMEGA128-16MNR is suitable for a wide range of applications due to its versatile features and robust performance. Some common applications include:

1. Industrial control systems: Programmable logic controllers (PLCs), motor control, and sensor interfacing.
2. Medical devices: Patient monitoring systems, wearable devices, and diagnostic equipment.
3. Consumer electronics: Home automation, smart appliances, and portable devices.
4. Automotive systems: In-vehicle infotainment systems, engine control units (ECUs), and safety systems.
5. Telecommunication systems: Modems, routers, and other network equipment.
6. Data acquisition systems: Signal processing, filtering, and conversion for various sensors.
7. Robotics: Control and coordination of robotic systems and autonomous vehicles.

The ATMEGA128-16MNR's combination of processing power, memory, and peripheral features make it a popular choice for developers looking to create efficient and reliable embedded systems.