Microchip Technology Tariff Inquiry

ATMEGA168PA-PN

Microchip Technology's ATMEGA168PA-PN is a low-power, high-performance 8-bit microcontroller unit (MCU) based on the AVR enhanced low-power architecture. This MCU is designed for a wide range of embedded applications, including industrial control, medical devices, and portable electronics.

Description:

The ATMEGA168PA-PN features 16 KB of in-system programmable flash memory for storing the program code, 1 KB of EEPROM, and 1 KB of SRAM. It operates at a frequency of up to 16 MHz and has a wide operating voltage range of 1.8-5.5 V. The device is available in a 36-pin plastic dual in-line package (PDIP).

Features:

1. 16 KB of In-System Programmable Flash memory with read-while-write capability
2. 1 KB EEPROM
3. 1 KB SRAM
4. 32 general-purpose I/O lines
5. 32 general-purpose working registers
6. Nested interrupt controller with 21 interrupt sources
7. Three 8-bit timers with modes for different counting resolutions
8. Two PWM channels with 8-bit resolution
9. Two USARTs with multi-sync mode
10. 8-channel, 10-bit ADC with programmable gain
11. Internal and external interrupts with configurable interrupt priority
12. On-chip debug system with JTAG interface
13. Spacing-saving 8-pin and 4-pin configurations
14. Idle and power-down modes for low-power operation
15. Brownout detection with programmable threshold and reset
16. Clock system with low-power internal RC oscillator and clock division

Applications:

1. Industrial control systems
2. Medical devices and equipment
3. Portable electronics and battery-powered devices
4. Home automation and smart appliances
5. Data acquisition and signal processing systems
6. Robotics and automation
7. Security systems and access control
8. Wireless communication modules
9. Human-Machine Interface (HMI) devices
10. Power management and energy monitoring systems

The ATMEGA168PA-PN is a versatile and efficient MCU suitable for a wide range of embedded applications, offering a good balance between performance, power consumption, and cost. Its low-power features make it an excellent choice for battery-powered devices, while its robust set of peripherals and features cater to various application requirements.