Microchip Technology Tariff Inquiry

ATMEGA2561-16AI

The ATMEGA2561-16AI is a microcontroller unit (MCU) produced by Microchip Technology. This MCU belongs to the AVR Enhanced series and is designed for a wide range of applications that require high performance and advanced features.

Description:

The ATMEGA2561-16AI is a high-performance 8-bit microcontroller based on the AVR core. It features a high-speed embedded PI Data Memory, efficient instruction execution, and a rich set of integrated peripherals. The MCU operates at a supply voltage range of 1.8V to 5.5V and has a clock frequency of up to 20 MHz.

Features:

1. CPU: 8-bit AVR RISC architecture with 16 x 16-bit general-purpose registers.
2. Memory: 256 KB In-System Programmable Flash memory, 16 KB SRAM, and 4 KB EEPROM.
3. Input/Output: 53 programmable I/O lines, with support for external interrupts and port interrupts.
4. Analog-to-Digital Converter (ADC): 16-channel, 10-bit ADC with up to 8 analog inputs.
5. Communication Interfaces: Two USARTs (USART0 and USART1) for serial communication, and a Two-wire Serial Interface (TWI).
6. Timers: 5-input Capture, 6-output Compare, and 6 PWM channels.
7. Clock System: Internal RC oscillator, external oscillator, and clock division.
8. Interrupts: 41 interrupt sources, including external interrupts, timer interrupts, and I/O interrupts.
9. Power Management: Sleep mode, power reduction, and brown-out detection.
10. Security: JTAG and SPI programming interfaces, with support for on-chip debugging and in-system programming.

Applications:

The ATMEGA2561-16AI is suitable for a wide range of applications due to its high performance, advanced features, and flexibility. Some common applications include:

1. Industrial control systems: Programmable logic controllers (PLCs), motor control, and sensor interfacing.
2. Medical equipment: Patient monitoring devices, diagnostic tools, and portable medical instruments.
3. Consumer electronics: Home automation, smart appliances, and portable devices.
4. Automotive systems: Engine control units (ECUs), body control modules, and infotainment systems.
5. Telecommunication systems: Modems, routers, and other network equipment.
6. Renewable energy systems: Solar power inverters, wind turbine controllers, and energy management systems.
7. Robotics: Robotic control, sensor processing, and autonomous navigation systems.

The ATMEGA2561-16AI's combination of processing power, memory, and integrated peripherals makes it an excellent choice for applications requiring advanced control, data processing, and communication capabilities.