Microchip Technology Tariff Inquiry

ATMEGA8535-16JJ

The ATMEGA8535-16JJ is a microcontroller unit (MCU) produced by Microchip Technology. It is part of the Atmel AVR family of 8-bit MCUs and is specifically designed for a wide range of applications that require high performance and low power consumption.

Description:

The ATMEGA8535-16JJ is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It features 8K bytes of in-system programmable Flash memory, 512 bytes of EEPROM, and 512 bytes of SRAM. The device operates at a frequency of up to 16 MHz and is available in a 24-pin TQFP package.

Features:

1. 8K bytes of In-System Programmable Flash memory with read-while-write capability
2. 512 bytes of EEPROM
3. 512 bytes of SRAM
4. 23 general-purpose I/O lines
5. 32 general-purpose working registers
6. Nested interrupt controller with 16 priority levels
7. On-chip debug support with JTAG interface
8. Two 8-bit timers/counters with 8-bit resolution and independent clock sources
9. One 16-bit timer/counter with 16-bit resolution
10. Two 8-bit PWM channels
11. One 8-bit USART with multi-sync mode
12. One 8-bit two-wire serial interface
13. SPI serial bus interface
14. Internal calibrated RC oscillator
15. External oscillator with frequency range up to 16 MHz
16. Brownout detection and reset
17. Sleep mode to reduce power consumption
18. Available in a 24-pin TQFP package

Applications:

The ATMEGA8535-16JJ is suitable for a wide range of applications that require a combination of high performance, low power consumption, and a compact form factor. Some of the potential applications include:

1. Industrial control systems
2. Home automation and smart home devices
3. Portable electronics and battery-powered devices
4. Medical equipment and wearable devices
5. Automotive control systems
6. Telecommunication systems
7. Data acquisition and signal processing systems
8. Consumer electronics
9. Robotics and automation systems
10. Security and surveillance systems

The ATMEGA8535-16JJ's combination of features, such as in-system programmable Flash memory, low power consumption, and a wide range of communication interfaces, makes it an ideal choice for many embedded systems and IoT applications.