Texas Instruments

TLC27L2CPWR  

OP Amps, Buffer Amps ICs

The Texas Instruments TLC27L2CPWR is a high-performance, 12-bit, rail-to-rail input/output (RRIO) precision operational amplifier (op-amp) designed for use in a wide range of applications. Here's a brief description, features, and applications of the TLC27L2CPWR:

Description:

The TLC27L2CPWR is a low-power, precision op-amp that offers excellent DC and AC performance characteristics. It is available in a small, 8-pin SOIC package, making it suitable for use in compact and portable electronic devices.

Features:

1. Precision performance: The TLC27L2CPWR offers low input offset voltage (typical 0.5 mV), low input bias current (typical 1 pA), and low drift over temperature.
2. Rail-to-rail input and output: The op-amp can accept input signals that go all the way to the negative and positive supply rails, and it can also drive its output to within a few millivolts of the supply rails.
3. Low power consumption: The TLC27L2CPWR operates with a low supply current of 1.1 mA (typical), making it suitable for battery-powered applications.
4. Wide supply voltage range: The op-amp can operate with supply voltages ranging from ±2.5V to ±18V, providing flexibility in system design.
5. High output drive: The TLC27L2CPWR can drive capacitive loads of up to 10 nF, making it suitable for driving high-capacity loads.
6. Short-circuit protection: The op-amp features internal protection against output short-circuit conditions, which helps prevent damage to the device.

Applications:

1. Battery-powered instruments: The low power consumption of the TLC27L2CPWR makes it ideal for use in battery-powered devices, such as portable data acquisition systems, medical instruments, and handheld electronic devices.
2. Strain gauge amplifiers: The precision and low drift characteristics of the TLC27L2CPWR make it well-suited for use in strain gauge amplifiers for force and pressure measurements.
3. pH meters and other sensor interfaces: The TLC27L2CPWR can be used to amplify and filter signals from various types of sensors, including pH meters, temperature sensors, and humidity sensors.
4. Audio amplifiers: The low distortion and high output drive capabilities of the TLC27L2CPWR make it suitable for use in audio amplifiers for portable audio devices and hearing aids.
5. Industrial control systems: The TLC27L2CPWR can be used in various industrial control applications, such as signal conditioning and amplification in process control systems and motor control circuits.

In summary, the Texas Instruments TLC27L2CPWR is a versatile, precision op-amp that offers excellent performance characteristics and low power consumption, making it suitable for a wide range of applications in both portable and industrial electronic devices.

TLC27L2CPWR Documents

Download datasheets and manufacturer documentation for TLC27L2CPWR

Datasheets :

TLC27L2(A, B), TLC27L7 Datasheet      

HTML Datasheet :

TLC27L2(A, B), TLC27L7 Datasheet      

PCN Design/Specification :

Design 22/Feb/2022