The ATMEGA168PB-MUR is a microcontroller unit (MCU) manufactured by Microchip Technology. It is part of the AVR Enhanced series of MCUs and is based on the 8-bit AVR microcontroller architecture.
Description:
The ATMEGA168PB-MUR is a low-power CMOS 8-bit microcontroller with advanced RISC architecture. It features 16 KB of In-System Programmable Flash memory, 1 KB EEPROM, 1 KB SRAM, and 32 general-purpose input/output (GPIO) lines. The device operates at a frequency of up to 16 MHz and has a wide operating voltage range of 1.8 to 5.5 V.
Features:
- 16 KB In-System Programmable Flash memory with read-while-write capability
- 1 KB EEPROM
- 1 KB SRAM
- 32 general-purpose I/O lines
- 32 general-purpose working registers
- Nested interrupt controller with 21 interrupt sources
- On-chip debug system with JTAG interface
- Three 16-bit timer/counters with input capture and compare modes
- Eight-channel 10-bit ADC with up to 11 differential inputs
- Serial peripheral interface (SPI)
- Two I2C interfaces
- Two USARTs with mode support for SPI master, SPI slave, and UART
- USB 2.0 full-speed (12 Mbps) interface with integrated PHY
- Internal and external interrupts
- Power-save mode, power-down mode, and standby mode for low-power operation
- Brown-out detection and reset
- Clock system with internal and external oscillator support, including a precision internal RC oscillator
- Temperature range of -40°C to +85°C
Applications:
The ATMEGA168PB-MUR is suitable for a wide range of applications, including but not limited to:
- Industrial control and automation
- Home automation and smart appliances
- Medical devices and equipment
- Portable electronics and gadgets
- Data acquisition and signal processing systems
- Battery-powered devices
- Embedded systems and IoT devices
- Robotics and automation systems
- Consumer electronics
- Automotive applications
The ATMEGA168PB-MUR's combination of features, such as low-power operation, a wide operating voltage range, and a variety of communication interfaces, makes it a versatile choice for many embedded systems and IoT applications.