Microchip Technology

ATMEGA64-16MU

The ATMEGA64-16MU is a microcontroller unit (MCU) produced by Microchip Technology. It is part of the ATmega family of 8-bit AVR microcontrollers, which are widely used in various embedded systems and applications.

Description:

The ATMEGA64-16MU features a high-performance 8-bit RISC architecture with 64 KB of In-System Programmable Flash memory, 4 KB of In-System Programmable SRAM, and 2 KB of In-System Programmable EEPROM. It operates at a frequency of 16 MHz and is available in a 64-pin QFN (Quad Flat No-leads) package.

Key Features:

1. 64 KB of In-System Programmable Flash memory for storing program code
2. 4 KB of In-System Programmable SRAM for data storage and manipulation
3. 2 KB of In-System Programmable EEPROM for non-volatile data storage
4. 16 MHz operating frequency
5. 44 general-purpose I/O lines with optional internal pull-up resistors
6. 33 extended I/O lines for additional functionality
7. 2 UARTs (Universal Asynchronous Receiver/Transmitters) for serial communication
8. 2 8-bit Timer/Counters with PWM (Pulse Width Modulation) and Input Capture/Output Compare modes
9. 1 16-bit Timer/Counter with PWM and Input Capture/Output Compare modes
10. 8-channel 10-bit ADC (Analog-to-Digital Converter) for analog signal conversion
11. 2 Fast PWM channels for motor control and signal generation
12. 3 Phase-Locked Loop (PLL) systems for clock frequency multiplication
13. On-chip debug system with JTAG (Joint Test Action Group) interface
14. Brownout detection and reset
15. Sleep and power-save modes for energy efficiency
16. Available in a 64-pin QFN package

Applications:

The ATMEGA64-16MU is suitable for a wide range of applications, including but not limited to:

1. Industrial control systems
2. Home automation and smart home devices
3. Medical equipment and devices
4. Robotics and automation
5. Portable electronic devices
6. Telecommunication equipment
7. Automotive electronics
8. Consumer electronics
9. Data acquisition and signal processing systems
10. Embedded systems requiring non-volatile memory and advanced communication interfaces

The ATMEGA64-16MU's combination of memory, processing power, and peripheral features make it a versatile choice for a variety of embedded applications requiring a balance between performance, memory, and power consumption.