The LPC11E67JBD64E is a microcontroller unit (MCU) from NXP Semiconductors. It belongs to the LPC1100 series, which are low-power, high-performance 32-bit ARM Cortex-M0+ based MCUs designed for a wide range of applications.
Description:
The LPC11E67JBD64E is a 64-pin QFN package MCU with 512KB on-chip program flash and 32KB on-chip SRAM. It features a high-speed USB On-The-Go (USB OTG) interface, which allows the device to act as a USB host or a USB function.
Features:
- ARM Cortex-M0+ processor with a clock speed of up to 50 MHz.
- 512KB on-chip program flash memory and 32KB on-chip SRAM.
- High-speed USB On-The-Go (USB OTG) interface.
- Up to 48 GPIO pins with multiple functions.
- 8-channel 10-bit ADC with up to 1Msps sampling rate.
- 8-channel DAC with 10-bit resolution.
- UART, SPI, and I2C communication interfaces.
- 2-channel PWM with independent dead-time control.
- CRC engine and USB packet buffer memory.
- Power consumption as low as 130 uA/MHz in active mode and 0.9 uA in deep power-down mode.
Applications:
- Industrial control and automation systems.
- Medical devices and equipment.
- Portable and wearable electronics.
- Consumer electronics, such as smart home devices and IoT devices.
- Automotive infotainment and body control systems.
- Data acquisition and signal processing systems.
- Communication and networking devices.
- Battery-powered devices, where low power consumption is critical.
The LPC11E67JBD64E's combination of high performance, low power consumption, and a wide range of communication interfaces make it suitable for a variety of embedded applications. Its USB OTG capability also enables easy integration with USB-based peripherals and devices.