ADT-060A19AA B-A: Description, Features, and Applications

What is a ADT-060A19AA B-A?

The ADT-060A19AA B-A power adapter, manufactured by Delta Electronics, is designed to provide a stable 19 V DC output with a power capacity of 60.8 W (3.2 A). It operates within an input voltage range of 85-264 V AC at 50/60 Hz, making it compatible with global power standards. Notable for its high efficiency, reaching up to 89%, it has a low no-load power consumption of less than 0.15 W, aligning with DoE Level VI and ErP Lot 7 energy efficiency standards.

The adapter’s dimensions (108 mm x 46 mm x 29.5 mm) and lightweight design (180 g) enhance its portability. It also incorporates several essential protection mechanisms, including overvoltage, overload, overtemperature, and short-circuit protection, ensuring reliable and safe operation. Equipped with either a C6 Class II or a Tuning Fork connector, it suits a wide array of devices, from industrial and medical equipment to consumer electronics. Typically available from multiple distributors, the ADT-060A19AA B-A is priced at around $22.31 for bulk orders, offering a cost-effective solution for high-quality power needs.

ADT-060A19AA B-A Dimensions

Key Features of ADT-060A19AA B-A

The ADT-060A19AA B-A is a versatile power adapter from Delta Electronics, notable for its efficiency and safety features. Here are the key features:

Output Specifications:

• Voltage: 19 V DC
• Current: 3.2 A
• Power Output: 60.8 W

Input Specifications:

• Voltage Range: 85-264 V AC
• Frequency: 50/60 Hz

Efficiency:

• Achieves up to 89% efficiency, complying with DoE Level VI and ErP Lot 7 standards.
• Very low no-load power consumption of less than 0.15 W.

Protection Features:

• Overvoltage, overload, overtemperature, and short-circuit protection mechanisms ensure safe operation.

Physical Characteristics:

• Dimensions: 108 mm x 46 mm x 29.5 mm (4.25 in x 1.81 in x 1.16 in)
• Weight: Approximately 180 grams (6.35 ounces)

Operating Conditions:

• Temperature range: Operates between -10°C to +60°C.
• Humidity: Can function in environments with humidity levels from 5% to 95% RH, non-condensing.

Connector Types:

• Available with C6 (Class II) or Tuning Fork connector configurations.

ADT-060A19AA B-A Specifications

Advantages of Using ADT-060A19AA B-A

The ADT-060A19AA B-A power adapter offers several advantages that make it a reliable choice for various applications. Here are the key benefits:

High Efficiency: With an efficiency rating of up to 89%, this adapter minimizes energy waste, making it cost-effective and environmentally friendly. It complies with DoE Level VI and ErP Lot 7 standards, ensuring high performance while reducing power consumption.

Wide Input Voltage Range: It supports a global input voltage range of 85-264 V AC, allowing it to be used in different regions without the need for additional converters.

Low No-load Power Consumption: The adapter consumes less than 0.15 W when not in use, further enhancing its energy efficiency and reducing electricity costs.

Robust Protection Features: It includes comprehensive safety mechanisms such as overvoltage, overload, overtemperature, and short-circuit protection. This ensures safe operation and prolongs the lifespan of connected devices.

Compact and Lightweight Design: Measuring just 108 mm x 46 mm x 29.5 mm and weighing approximately 180 grams, it is easy to transport and ideal for both stationary and mobile applications.

Reliable Performance in Various Conditions: The adapter operates effectively in a temperature range of -10°C to +60°C and can handle humidity levels from 5% to 95% RH, making it suitable for diverse environments.

Long Lifespan: With an MTBF (Mean Time Between Failures) of over 700,000 hours, the ADT-060A19AA B-A is designed for durability and reliability, reducing the need for frequent replacements.

These advantages make the ADT-060A19AA B-A a versatile and dependable choice for powering electronic devices across various industries.

ADT-060A19AA B-A Applications

The ADT-060A19AA B-A power adapter is used in a variety of applications due to its robust specifications and features. Here are some of its primary applications:

Consumer Electronics: Commonly used to power laptops, tablets, and other portable devices that require a 19V power supply, making it suitable for both home and office environments.

Industrial Equipment: Its reliability and efficiency make it ideal for powering industrial devices and equipment that operate in varying environmental conditions.

Medical Devices: The adapter's safety features, including overvoltage and short-circuit protection, allow it to be used in medical applications where stable power is critical.

Telecommunications: Often utilized in telecom equipment, where consistent power supply is necessary for uninterrupted service.

Networking Devices: Suitable for powering routers, switches, and other networking hardware that operate on a 19V input.

Portable Charging Solutions: Due to its compact design and lightweight nature, it is an excellent choice for portable charging solutions in travel or mobile workstations.

These applications leverage the adapter's efficiency, safety features, and wide input voltage range, making it versatile across different sectors.

ADT-060A19AA B-A Equivalents

The ADT-060A19AA B-A adapter is commonly used for devices requiring a 19V output and around 3.15A current, typically laptops, monitors, and similar electronics. Listed above are equivalent models from various manufacturers, including Delta, Liteon, and Chicony. Each option offers similar power characteristics, suitable for multi-purpose usage in electronic devices where a stable 19V output is needed. Selecting an equivalent should be based on the device's specific power requirements to ensure optimal compatibility and performance.

ADT-060A19AA B-A Compared to other adapters in the same series

The ADT-060A19AA B-A power adapter can be compared to other models in the same ADT-060A series, which includes variants like ADT-060A12A B-A, ADT-060A15A B-A, and ADT-060A24A B-A. Here’s a comparison highlighting their key specifications and features:

Key Comparisons:

Output Voltage and Current: The ADT-060A19AA B-A provides a unique output voltage of 19 V DC, with a current of 3.2 A, making it suitable for devices specifically requiring this voltage level. In contrast, the other models cater to different voltage requirements (12V, 15V, and 24V).

Power Output: The ADT-060A19AA B-A has a slightly higher power output of 60.8 W, compared to the standard 60 W offered by the other models, allowing it to support devices with slightly higher power demands.

Efficiency and Design: All models in this series share similar efficiency ratings of up to 89%, compact dimensions of 108 x 46 x 29.5 mm, and a weight of approximately 180 grams, ensuring they are lightweight and easy to handle.

Applications:

Each model is designed for specific applications based on their output voltage:

The ADT-060A12A B-A is suitable for low-voltage devices.

The ADT-060A15A B-A is often used in mid-range power applications.

The ADT-060A19A B-A, with its unique specifications, is ideal for laptops and other electronics that require a stable 19V supply.

The ADT-060A24A B-A is appropriate for higher voltage applications.

In summary, the choice between these adapters depends on the specific voltage and current requirements of the device being powered, while all models maintain high efficiency and safety standards typical of Delta Electronics products.

Working Principle of ADT-060A19AA B-A

The ADT-060A19AA B-A power adapter operates on a straightforward principle of converting alternating current (AC) from a wall outlet into a direct current (DC) suitable for powering electronic devices. Here’s a detailed explanation of its working principle:

AC Input: The adapter accepts an input voltage range of 85-264 V AC, which is standard for global use. This allows it to function in various regions without requiring additional converters.

Rectification: Inside the adapter, the incoming AC voltage is first passed through a rectifier circuit. This circuit converts the AC voltage into pulsating DC voltage.

Filtering: The pulsating DC output from the rectifier is not suitable for most electronic devices, so it undergoes filtering. Capacitors smooth out the pulsating signal, resulting in a more stable DC voltage.

Voltage Regulation: The filtered DC voltage is then regulated to ensure it remains constant at 19 V DC, even if there are fluctuations in the input voltage or load conditions. This is critical for protecting sensitive electronic components.

Output Delivery: After regulation, the stable 19 V DC output is delivered to the connected device through a specified connector type (C6 or Tuning Fork). The adapter can provide up to 3.2 A, ensuring sufficient current for most applications.

Safety Features: The ADT-060A19AA B-A includes multiple protection mechanisms:

Overvoltage Protection: Prevents damage by shutting down the output if the voltage exceeds safe levels.

Overload Protection: Limits current to prevent overheating and damage to both the adapter and connected devices.

Short-Circuit Protection: Automatically disconnects output in case of short circuits, ensuring safety.

Thermal Protection: Shut down the adapter if it overheats, preventing potential hazards.

Energy Efficiency: The adapter is designed to be energy-efficient, achieving up to 89% efficiency and maintaining low no-load power consumption (less than 0.15 W). This compliance with energy standards (DoE Level VI and ErP Lot 7) minimizes energy waste.

Operating Conditions: It operates effectively in a wide temperature range of -10°C to +60°C, making it suitable for various environments.

This combination of features ensures that the ADT-060A19AA B-A provides a reliable and safe power supply for a wide range of electronic devices while adhering to energy efficiency standards.

ADT-060A19AA B-A Datasheet

ADT-060A19AA B-A Datasheet